Format
Sort by
Items per page

Send to

Choose Destination

Links from PubMed

Items: 1 to 20 of 101

1.

Three-dimensional evaluation of the reproducibility of presintered zirconia single copings fabricated with the subtractive method.

Kim CM, Jeon JH, Kim JH, Kim HY, Kim WC.

J Prosthet Dent. 2016 Aug;116(2):237-41. doi: 10.1016/j.prosdent.2015.10.027. Epub 2016 Mar 30.

PMID:
27038527
2.

Three-dimensional analysis of marginal and internal fit of copings fabricated with polyetherketoneketone (PEKK) and zirconia.

Bae SY, Park JY, Jeong ID, Kim HY, Kim JH, Kim WC.

J Prosthodont Res. 2017 Apr;61(2):106-112. doi: 10.1016/j.jpor.2016.07.005. Epub 2016 Jul 31.

PMID:
27484816
3.

Influence of various gypsum materials on precision of fit of CAD/CAM-fabricated zirconia copings.

Kim JH, Kim KB, Kim WC, Rhee HS, Lee IH, Kim JH.

Dent Mater J. 2015;34(1):19-24. doi: 10.4012/dmj.2014-141. Epub 2015 Jan 17.

4.

The influence of different convergence angles and resin cements on the retention of zirconia copings.

Ali AO, Kelly JR, Zandparsa R.

J Prosthodont. 2012 Dec;21(8):614-21. doi: 10.1111/j.1532-849X.2012.00884.x. Epub 2012 Jul 23.

PMID:
22823334
5.

Influence of convergence angle and cement space on adaptation of zirconium dioxide ceramic copings.

Iwai T, Komine F, Kobayashi K, Saito A, Matsumura H.

Acta Odontol Scand. 2008 Aug;66(4):214-8. doi: 10.1080/00016350802139833.

PMID:
18607834
6.

The effect of different fabrication steps on the marginal adaptation of two types of glass-infiltrated ceramic crown copings fabricated by CAD/CAM technology.

Alghazzawi TF, Liu PR, Essig ME.

J Prosthodont. 2012 Apr;21(3):167-72. doi: 10.1111/j.1532-849X.2011.00803.x. Epub 2012 Feb 28.

PMID:
22372838
7.

Influence of internal-gap width and cement type on the retentive force of zirconia copings in pullout testing.

Son YH, Han CH, Kim S.

J Dent. 2012 Oct;40(10):866-72. doi: 10.1016/j.jdent.2012.07.007. Epub 2012 Jul 20.

PMID:
22819954
8.

In vitro evaluation of the internal and marginal misfit of CAD/CAM zirconia copings.

Lins L, Bemfica V, Queiroz C, Canabarro A.

J Prosthet Dent. 2015 Mar;113(3):205-11. doi: 10.1016/j.prosdent.2014.09.010. Epub 2014 Nov 25.

PMID:
25453562
9.

An evaluation of impression techniques for multiple internal connection implant prostheses.

Vigolo P, Fonzi F, Majzoub Z, Cordioli G.

J Prosthet Dent. 2004 Nov;92(5):470-6.

PMID:
15523336
10.

Evaluation of the accuracy of three techniques used for multiple implant abutment impressions.

Vigolo P, Majzoub Z, Cordioli G.

J Prosthet Dent. 2003 Feb;89(2):186-92.

PMID:
12616240
11.

High-strength CAD/CAM-fabricated veneering material sintered to zirconia copings--a new fabrication mode for all-ceramic restorations.

Beuer F, Schweiger J, Eichberger M, Kappert HF, Gernet W, Edelhoff D.

Dent Mater. 2009 Jan;25(1):121-8. doi: 10.1016/j.dental.2008.04.019. Epub 2008 Jul 11.

PMID:
18620748
12.

Marginal fit of 14-unit zirconia fixed dental prosthesis retainers.

Beuer F, Neumeier P, Naumann M.

J Oral Rehabil. 2009 Feb;36(2):142-9. doi: 10.1111/j.1365-2842.2008.01908.x. Epub 2008 Oct 29.

PMID:
18976261
13.

In vitro assessment of three types of zirconia implant abutments under static load.

Kim JS, Raigrodski AJ, Flinn BD, Rubenstein JE, Chung KH, Mancl LA.

J Prosthet Dent. 2013 Apr;109(4):255-63. doi: 10.1016/S0022-3913(13)60054-2.

PMID:
23566607
14.

Comparison of marginal fit of Lava CAD/CAM crown-copings with two finish lines.

Re D, Cerutti F, Augusti G, Cerutti A, Augusti D.

Int J Esthet Dent. 2014 Autumn;9(3):426-35.

PMID:
25126621
15.

Influence of preparation angle on marginal and internal fit of CAD/CAM-fabricated zirconia crown copings.

Beuer F, Aggstaller H, Richter J, Edelhoff D, Gernet W.

Quintessence Int. 2009 Mar;40(3):243-50.

PMID:
19417888
16.

Translucency of zirconia copings made with different CAD/CAM systems.

Baldissara P, Llukacej A, Ciocca L, Valandro FL, Scotti R.

J Prosthet Dent. 2010 Jul;104(1):6-12. doi: 10.1016/S0022-3913(10)60086-8.

PMID:
20620365
17.

Influence of surface treatment of yttrium-stabilized tetragonal zirconium oxides and cement type on crown retention after artificial aging.

Karimipour-Saryazdi M, Sadid-Zadeh R, Givan D, Burgess JO, Ramp LC, Liu PR.

J Prosthet Dent. 2014 May;111(5):395-403. doi: 10.1016/j.prosdent.2013.09.034. Epub 2014 Feb 14.

PMID:
24529652
18.

Influence of CAD/CAM scanning method and tooth-preparation design on the vertical misfit of zirconia crown copings.

Castillo Oyagüe R, Sánchez-Jorge MI, Sánchez Turrión A.

Am J Dent. 2010 Dec;23(6):341-6.

PMID:
21344834
19.

3D fitting accuracy evaluation of CAD/CAM copings - comparison with spacer design settings.

Boitelle P, Tapie L, Mawussi B, Fromentin O.

Int J Comput Dent. 2016;19(1):27-43. English, French.

PMID:
27027101
20.

Cement selection for implant-supported crowns fabricated with different luting space settings.

Gultekin P, Gultekin BA, Aydin M, Yalcin S.

J Prosthodont. 2013 Feb;22(2):112-9. doi: 10.1111/j.1532-849X.2012.00912.x.

PMID:
23387964

Supplemental Content

Support Center