Format
Sort by
Items per page

Send to

Choose Destination

Links from PubMed

Items: 1 to 20 of 180

1.

Characterization of Ni-Cr alloys using different casting techniques and molds.

Chen WC, Teng FY, Hung CC.

Mater Sci Eng C Mater Biol Appl. 2014 Feb 1;35:231-8. doi: 10.1016/j.msec.2013.11.014. Epub 2013 Nov 18.

PMID:
24411373
2.

Characterization of two Ni-Cr dental alloys and the influence of casting mode on mechanical properties.

Bauer J, Costa JF, Carvalho CN, Grande RH, Loguercio AD, Reis A.

J Prosthodont Res. 2012 Oct;56(4):264-71. doi: 10.1016/j.jpor.2012.02.004. Epub 2012 May 19.

PMID:
22609222
3.

Does the casting mode influence microstructure, fracture and properties of different metal ceramic alloys?

Bauer JR, Grande RH, Rodrigues-Filho LE, Pinto MM, Loguercio AD.

Braz Oral Res. 2012 May-Jun;26(3):190-6.

4.

Microhardness of Ni-Cr alloys under different casting conditions.

Bauer JR, Loguercio AD, Reis A, Rodrigues Filho LE.

Braz Oral Res. 2006 Jan-Mar;20(1):40-6. Epub 2006 May 22.

5.

Analysis of four dental alloys following torch/centrifugal and induction/ vacuum-pressure casting procedures.

Thompson GA, Luo Q, Hefti A.

J Prosthet Dent. 2013 Dec;110(6):471-80. doi: 10.1016/j.prosdent.2013.09.001. Epub 2013 Oct 10.

PMID:
24120072
6.

Effect of PFM Firing Cycles on the Mechanical Properties, Phase Composition, and Microstructure of Nickel-Chromium Alloy.

Anwar M, Tripathi A, Kar SK, Sekhar KC.

J Prosthodont. 2015 Dec;24(8):634-41. doi: 10.1111/jopr.12328. Epub 2015 Jul 27.

PMID:
26215348
7.

Corrosion behaviour and surface analysis of a Co-Cr and two Ni-Cr dental alloys before and after simulated porcelain firing.

Qiu J, Yu WQ, Zhang FQ, Smales RJ, Zhang YL, Lu CH.

Eur J Oral Sci. 2011 Feb;119(1):93-101. doi: 10.1111/j.1600-0722.2011.00791.x.

PMID:
21244518
8.

Microstructure, mechanical performance and corrosion properties of base metal solder joints.

Machha S, Kumar MV; Azhagarasan, Rangarajan V.

Indian J Dent Res. 2011 Jul-Aug;22(4):614. doi: 10.4103/0970-9290.90326.

9.
10.

Metallurgical, surface, and corrosion analysis of Ni-Cr dental casting alloys before and after porcelain firing.

Lin HY, Bowers B, Wolan JT, Cai Z, Bumgardner JD.

Dent Mater. 2008 Mar;24(3):378-85. Epub 2007 Aug 15.

PMID:
17706759
11.

Mechanical properties, fracture surface characterization, and microstructural analysis of six noble dental casting alloys.

Ucar Y, Brantley WA, Johnston WM, Dasgupta T.

J Prosthet Dent. 2011 Jun;105(6):394-402. doi: 10.1016/S0022-3913(11)60081-4.

PMID:
21640241
12.

Evaluation of mechanical properties and porcelain bonded strength of nickel-chromium dental alloy fabricated by laser rapid forming.

Liu Y, Wang Z, Gao B, Zhao X, Lin X, Wu J.

Lasers Med Sci. 2010 Nov;25(6):799-804. doi: 10.1007/s10103-009-0690-3. Epub 2009 Jun 23.

PMID:
19548056
13.

Properties of test metal ceramic titanium alloys.

Akagi K, Okamoto Y, Matsuura T, Horibe T.

J Prosthet Dent. 1992 Sep;68(3):462-7.

PMID:
1432762
14.

Effect of chromium content on mechanical properties of casting Ti-Cr alloys.

Hattori M, Takemoto S, Yoshinari M, Kawada E, Oda Y.

Dent Mater J. 2010 Oct;29(5):570-4. Epub 2010 Aug 20.

15.

Mechanical properties and microstructures of cast Ti-Cu alloys.

Kikuchi M, Takada Y, Kiyosue S, Yoda M, Woldu M, Cai Z, Okuno O, Okabe T.

Dent Mater. 2003 May;19(3):174-81.

PMID:
12628428
16.

Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelain.

Akova T, Ucar Y, Tukay A, Balkaya MC, Brantley WA.

Dent Mater. 2008 Oct;24(10):1400-4. doi: 10.1016/j.dental.2008.03.001. Epub 2008 Apr 15.

PMID:
18417202
17.

Metallurgical and interfacial characterization of PFM Co-Cr dental alloys fabricated via casting, milling or selective laser melting.

Al Jabbari YS, Koutsoukis T, Barmpagadaki X, Zinelis S.

Dent Mater. 2014 Apr;30(4):e79-88. doi: 10.1016/j.dental.2014.01.008. Epub 2014 Feb 15.

PMID:
24534375
18.

Effect of casting atmosphere on the shear bond strength of a ceramic to Ni-Cr and Ni-Cr-Be alloys.

Pagnano VO, Esquivel Mde C, Leal MB, Felipucci DN, Bezzon OL.

Braz Dent J. 2009;20(2):138-42.

19.

Mechanical properties and grindability of dental cast Ti-Nb alloys.

Kikuchi M, Takahashi M, Okuno O.

Dent Mater J. 2003 Sep;22(3):328-42.

20.

In vitro tensile bond strength of denture repair acrylic resins to primed base metal alloys using two different processing techniques.

Banerjee S, Engelmeier RL, O'Keefe KL, Powers JM.

J Prosthodont. 2009 Dec;18(8):676-83. doi: 10.1111/j.1532-849X.2009.00499.x. Epub 2009 Aug 4.

PMID:
19682213

Supplemental Content

Support Center