Format
Sort by
Items per page

Send to

Choose Destination

Links from PubMed

Items: 1 to 20 of 74

2.
3.

Magnetic resonance imaging technology in transtibial socket research: a pilot study.

Buis AW, Condon B, Brennan D, McHugh B, Hadley D.

J Rehabil Res Dev. 2006 Nov-Dec;43(7):883-90.

4.

Hands-off and hands-on casting consistency of amputee below knee sockets using magnetic resonance imaging.

Safari MR, Rowe P, McFadyen A, Buis A.

ScientificWorldJournal. 2013 Nov 19;2013:486146. doi: 10.1155/2013/486146. eCollection 2013.

6.

Design of manikin for testing of residual-limb shape-capture method: technical note.

McGarry A, McHugh B, Duers J, Buis AW.

J Rehabil Res Dev. 2011;48(3):245-51.

7.

A preliminary investigation into the development of 3-D printing of prosthetic sockets.

Herbert N, Simpson D, Spence WD, Ion W.

J Rehabil Res Dev. 2005 Mar-Apr;42(2):141-6.

8.

Influence of prior activity on residual limb volume and shape measured using plaster casting: results from individuals with transtibial limb loss.

Sanders JE, Severance MR, Swartzendruber DL, Allyn KJ, Ciol MA.

J Rehabil Res Dev. 2013;50(7):1007-16. doi: 10.1682/JRRD.2012.10.0195.

9.

3D reconstruction of the structure of a residual limb for customising the design of a prosthetic socket.

Shuxian Z, Wanhua Z, Bingheng L.

Med Eng Phys. 2005 Jan;27(1):67-74.

PMID:
15604007
10.

Finite element modeling of the contact interface between trans-tibial residual limb and prosthetic socket.

Lee WC, Zhang M, Jia X, Cheung JT.

Med Eng Phys. 2004 Oct;26(8):655-62.

PMID:
15471693
11.

Ultrasound imaging in lower limb prosthetics.

Douglas T, Solomonidis S, Sandham W, Spence W.

IEEE Trans Neural Syst Rehabil Eng. 2002 Mar;10(1):11-21. Review.

PMID:
12173735
12.
13.

Vacuum-assisted socket suspension compared with pin suspension for lower extremity amputees: effect on fit, activity, and limb volume.

Klute GK, Berge JS, Biggs W, Pongnumkul S, Popovic Z, Curless B.

Arch Phys Med Rehabil. 2011 Oct;92(10):1570-5. doi: 10.1016/j.apmr.2011.05.019.

PMID:
21963124
14.

Strength evaluation of prosthetic check sockets, copolymer sockets, and definitive laminated sockets.

Gerschutz MJ, Haynes ML, Nixon D, Colvin JM.

J Rehabil Res Dev. 2012;49(3):405-26.

15.

Advanced trans-tibial socket fabrication using selective laser sintering.

Rogers B, Bosker GW, Crawford RH, Faustini MC, Neptune RR, Walden G, Gitter AJ.

Prosthet Orthot Int. 2007 Mar;31(1):88-100.

PMID:
17365888
16.
17.

Real-time patient-specific finite element analysis of internal stresses in the soft tissues of a residual limb: a new tool for prosthetic fitting.

Portnoy S, Yarnitzky G, Yizhar Z, Kristal A, Oppenheim U, Siev-Ner I, Gefen A.

Ann Biomed Eng. 2007 Jan;35(1):120-35. Epub 2006 Oct 31.

PMID:
17120139
18.

Static and dynamic pressure prediction for prosthetic socket fitting assessment utilising an inverse problem approach.

Sewell P, Noroozi S, Vinney J, Amali R, Andrews S.

Artif Intell Med. 2012 Jan;54(1):29-41. doi: 10.1016/j.artmed.2011.09.005. Epub 2011 Oct 1.

PMID:
21963113
19.
20.

CIR Casting System for making transtibial sockets.

Wu Y, Casanova HR, Reisinger KD, Smith WK, Childress DS.

Prosthet Orthot Int. 2009 Mar;33(1):1-9. doi: 10.1080/03093640802446703. Erratum in: Prosthet Orthot Int. 2009 Jun;33(2):99.

PMID:
19235060

Supplemental Content

Support Center