Format
Sort by
Items per page

Send to

Choose Destination

Search results

Items: 1 to 20 of 543

1.

Evaluation of the reproducibility of various abutments using a blue light model scanner.

Kim DY, Lee KE, Jeon JH, Kim JH, Kim WC.

J Adv Prosthodont. 2018 Aug;10(4):328-334. doi: 10.4047/jap.2018.10.4.328. Epub 2018 Aug 17.

2.

A study on the machining accuracy of dental digital method focusing on dental inlay.

Bae EJ, Jeong ID, Kim WC, Kim JH.

J Adv Prosthodont. 2018 Aug;10(4):321-327. doi: 10.4047/jap.2018.10.4.321. Epub 2018 Aug 17.

3.

Polish of interface areas between zirconia, silicate-ceramic, and composite with diamond-containing systems.

Pott PC, Hoffmann JP, Stiesch M, Eisenburger M.

J Adv Prosthodont. 2018 Aug;10(4):315-320. doi: 10.4047/jap.2018.10.4.315. Epub 2018 Aug 17.

4.

Influence of nonthermal argon plasma on the shear bond strength between zirconia and different adhesives and luting composites after artificial aging.

Pott PC, Syväri TS, Stiesch M, Eisenburger M.

J Adv Prosthodont. 2018 Aug;10(4):308-314. doi: 10.4047/jap.2018.10.4.308. Epub 2018 Aug 17.

5.

In vitro performance and fracture resistance of novel CAD/CAM ceramic molar crowns loaded on implants and human teeth.

Preis V, Hahnel S, Behr M, Rosentritt M.

J Adv Prosthodont. 2018 Aug;10(4):300-307. doi: 10.4047/jap.2018.10.4.300. Epub 2018 Aug 17.

6.

The effect of light sources and CAD/CAM monolithic blocks on degree of conversion of cement.

Çetindemir AB, Şermet B, Öngül D.

J Adv Prosthodont. 2018 Aug;10(4):291-299. doi: 10.4047/jap.2018.10.4.291. Epub 2018 Aug 17.

7.

Influence of the amount of tooth surface preparation on the shear bond strength of zirconia cantilever single-retainer resin-bonded fixed partial denture.

Sillam CE, Cetik S, Ha TH, Atash R.

J Adv Prosthodont. 2018 Aug;10(4):286-290. doi: 10.4047/jap.2018.10.4.286. Epub 2018 Aug 17.

8.

The accuracy of a 3D printing surgical guide determined by CBCT and model analysis.

Ma B, Park T, Chun I, Yun K.

J Adv Prosthodont. 2018 Aug;10(4):279-285. doi: 10.4047/jap.2018.10.4.279. Epub 2018 Aug 17.

9.

Surface deterioration of monolithic CAD/CAM restorative materials after artificial abrasive toothbrushing.

Şen N, Tuncelli B, Göller G.

J Adv Prosthodont. 2018 Aug;10(4):271-278. doi: 10.4047/jap.2018.10.4.271. Epub 2018 Aug 17.

10.

Accuracy of new implant impression technique using dual arch tray and bite impression coping.

Lee SE, Yang SE, Lee CW, Lee WS, Lee SY.

J Adv Prosthodont. 2018 Aug;10(4):265-270. doi: 10.4047/jap.2018.10.4.265. Epub 2018 Aug 17.

11.

The effect of zirconia surface architecturing technique on the zirconia/veneer interfacial bond strength.

Her SB, Kim KH, Park SE, Park EJ.

J Adv Prosthodont. 2018 Aug;10(4):259-264. doi: 10.4047/jap.2018.10.4.259. Epub 2018 Aug 17.

12.

Evaluation of the repeatability and matching accuracy between two identical intraoral spectrophotometers: an in vivo and in vitro study.

Kim HK.

J Adv Prosthodont. 2018 Jun;10(3):252-258. doi: 10.4047/jap.2018.10.3.252. Epub 2018 Jun 12.

13.

Accuracy evaluation of dental models manufactured by CAD/CAM milling method and 3D printing method.

Jeong YG, Lee WS, Lee KB.

J Adv Prosthodont. 2018 Jun;10(3):245-251. doi: 10.4047/jap.2018.10.3.245. Epub 2018 Jun 12.

14.

Comparison of the marginal fit of milled yttrium stabilized zirconium dioxide crowns obtained by scanning silicone impressions and by scanning stone replicas.

Aranda Yus E, Cantarell JMA, Miñarro Alonso A.

J Adv Prosthodont. 2018 Jun;10(3):236-244. doi: 10.4047/jap.2018.10.3.236. Epub 2018 Jun 12.

15.

The effect of undersizing and tapping on bone to implant contact and implant primary stability: A histomorphometric study on bovine ribs.

Di Stefano DA, Perrotti V, Greco GB, Cappucci C, Arosio P, Piattelli A, Iezzi G.

J Adv Prosthodont. 2018 Jun;10(3):227-235. doi: 10.4047/jap.2018.10.3.227. Epub 2018 Jun 12.

16.

Color comparison between non-vital and vital teeth.

Greta DC, Colosi HA, Gasparik C, Dudea D.

J Adv Prosthodont. 2018 Jun;10(3):218-226. doi: 10.4047/jap.2018.10.3.218. Epub 2018 Jun 12.

17.

The effect of sandblasting duration on the bond durability of dual-cure adhesive cement to CAD/CAM resin restoratives.

Tekçe N, Tuncer S, Demirci M.

J Adv Prosthodont. 2018 Jun;10(3):211-217. doi: 10.4047/jap.2018.10.3.211. Epub 2018 Jun 12.

18.

In vitro shear bond strength between fluorinated zirconia ceramic and resin cements.

Tanış MÇ, Akay C, Akçaboy TC, Şen M, Kavaklı PA, Sapmaz K.

J Adv Prosthodont. 2018 Jun;10(3):205-210. doi: 10.4047/jap.2018.10.3.205. Epub 2018 Jun 12.

19.

Influence of scaling procedures on the integrity of titanium nitride coated CAD/CAM abutments.

Gehrke P, Spanos E, Fischer C, Storck H, Tebbel F, Duddeck D.

J Adv Prosthodont. 2018 Jun;10(3):197-204. doi: 10.4047/jap.2018.10.3.197. Epub 2018 Jun 12.

20.

A retrospective clinical study of single short implants (less than 8 mm) in posterior edentulous areas.

Kim SY, Ku JK, Kim HS, Yun PY, Kim YK.

J Adv Prosthodont. 2018 Jun;10(3):191-196. doi: 10.4047/jap.2018.10.3.191. Epub 2018 Jun 12.

Supplemental Content

Loading ...
Support Center