Format

Send to

Choose Destination
Sci Adv. 2016 Feb 19;2(2):e1500778. doi: 10.1126/sciadv.1500778. eCollection 2016 Feb.

Dynamically variable negative stiffness structures.

Author information

1
HRL Laboratories LLC, Malibu, CA 90265, USA.

Abstract

Variable stiffness structures that enable a wide range of efficient load-bearing and dexterous activity are ubiquitous in mammalian musculoskeletal systems but are rare in engineered systems because of their complexity, power, and cost. We present a new negative stiffness-based load-bearing structure with dynamically tunable stiffness. Negative stiffness, traditionally used to achieve novel response from passive structures, is a powerful tool to achieve dynamic stiffness changes when configured with an active component. Using relatively simple hardware and low-power, low-frequency actuation, we show an assembly capable of fast (<10 ms) and useful (>100×) dynamic stiffness control. This approach mitigates limitations of conventional tunable stiffness structures that exhibit either small (<30%) stiffness change, high friction, poor load/torque transmission at low stiffness, or high power active control at the frequencies of interest. We experimentally demonstrate actively tunable vibration isolation and stiffness tuning independent of supported loads, enhancing applications such as humanoid robotic limbs and lightweight adaptive vibration isolators.

KEYWORDS:

Vibration isolation; impedance control; negative stiffness; nonlinear structures

PMID:
26989771
PMCID:
PMC4788489
DOI:
10.1126/sciadv.1500778
[Indexed for MEDLINE]
Free PMC Article

Supplemental Content

Full text links

Icon for PubMed Central
Loading ...
Support Center