Format

Send to

Choose Destination
Materials (Basel). 2014 Dec 2;7(12):7706-7721. doi: 10.3390/ma7127706.

Reliability Study of Solder Paste Alloy for the Improvement of Solder Joint at Surface Mount Fine-Pitch Components.

Author information

1
Faculty of Engineering & Built Environment, National University of Malaysia, Selangor, 43600 UKM, Bangi, Malaysia. mnizam@eng.ukm.my.
2
Faculty of Engineering & Built Environment, National University of Malaysia, Selangor, 43600 UKM, Bangi, Malaysia. anaarshad@yahoo.com.
3
Faculty of Engineering & Built Environment, National University of Malaysia, Selangor, 43600 UKM, Bangi, Malaysia. herdi.leuveano05@gmail.com.
4
Faculty of Engineering & Built Environment, National University of Malaysia, Selangor, 43600 UKM, Bangi, Malaysia. jaharah@eng.ukm.my.
5
Faculty of Engineering & Built Environment, National University of Malaysia, Selangor, 43600 UKM, Bangi, Malaysia. faizal.mahmood@ukm.edu.my.

Abstract

The significant increase in metal costs has forced the electronics industry to provide new materials and methods to reduce costs, while maintaining customers' high-quality expectations. This paper considers the problem of most electronic industries in reducing costly materials, by introducing a solder paste with alloy composition tin 98.3%, silver 0.3%, and copper 0.7%, used for the construction of the surface mount fine-pitch component on a Printing Wiring Board (PWB). The reliability of the solder joint between electronic components and PWB is evaluated through the dynamic characteristic test, thermal shock test, and Taguchi method after the printing process. After experimenting with the dynamic characteristic test and thermal shock test with 20 boards, the solder paste was still able to provide a high-quality solder joint. In particular, the Taguchi method is used to determine the optimal control parameters and noise factors of the Solder Printer (SP) machine, that affects solder volume and solder height. The control parameters include table separation distance, squeegee speed, squeegee pressure, and table speed of the SP machine. The result shows that the most significant parameter for the solder volume is squeegee pressure (2.0 mm), and the solder height is the table speed of the SP machine (2.5 mm/s).

KEYWORDS:

Taguchi method; dynamic characteristic; fine-pitch component; solder joint; solder paste; thermal shock

Supplemental Content

Full text links

Icon for Multidisciplinary Digital Publishing Institute (MDPI) Icon for PubMed Central
Loading ...
Support Center