Format

Send to

Choose Destination
Materials (Basel). 2019 Jul 29;12(15). pii: E2419. doi: 10.3390/ma12152419.

Constitutive Modeling of the Tensile Behavior of Recycled Polypropylene-Based Composites.

Author information

1
Key Laboratory of Traffic Safety on Track (Central South University) Ministry of Education, School of Traffic & Transportation Engineering, Central South University, Changsha 410075, China.
2
Joint International Research Laboratory of Key Technology for Rail Traffic Safety, Central South University, Changsha 410075, China.
3
Arts et Métiers ParisTech, LEM3, Université de Lorraine, CNRS, F-57000 Metz, France. rodrigue.matadi-boumbimba@univ-lorraine.fr.
4
ICUBE Laboratory-CNRS, University of Strasbourg, 67000 Strasbourg, France.
5
Qatar Environment and Energy Research Institute (QEERI), Hamad bin Khalifa University (HBKU), Qatar Foundation, Doha 34110, Qatar.
6
Department Materials Research and Technology (MRT), Luxembourg Institute of Science and Technology (LIST), ZAE Robert Steichen, 5 Rue Bommel, L-4940 Hautcharage, Luxembourg.

Abstract

The effect of reprocessing on the quasi-static uniaxial tensile behavior of two commercial polypropylene (PP)-based composites is experimentally investigated and modeled. In particular, the studied materials consist of an unfilled high-impact PP and a talc-filled high-impact PP. These PP composites are subjected to repeated processing cycles, including a grinding step and an extrusion step to simulate recycling at the laboratory level, the selected reprocessing numbers for this study being 0, 3, 6, 9, and 12. Because the repeated reprocessing leads to thermo-mechanical degradation by chain scission mechanisms, the tensile behavior of the two materials exhibits a continuous decrease of elastic modulus and failure strain with the increasing amount of reprocessing. A physically consistent three-dimensional constitutive model is used to predict the tensile response of non-recycled materials with strain rate dependence. For the recycled materials, the reprocessing effect is accounted by incorporating the reprocessing sensitive coefficient into the constitutive model for Young's modulus, failure strain, softening, and hardening equations. Our predictions of true stress-true strain curves for non-recycled and recycled 108MF97 and 7510-are in good agreement with experimental data and can be useful for industries and companies which are looking for a model able to predict the recycling effect on mechanical behavior of polymer-based materials.

KEYWORDS:

composite; constitutive model; mechanical properties; polypropylene; reprocessing; strain rate

Supplemental Content

Full text links

Icon for Multidisciplinary Digital Publishing Institute (MDPI) Icon for PubMed Central
Loading ...
Support Center