Format
Sort by
Items per page

Send to

Choose Destination

Search results

Items: 16

1.
2.

Taguchi's methods to optimize the properties and bioactivity of 3D printed polycaprolactone/mineral trioxide aggregate scaffold: Theoretical predictions and experimental validation.

Bhargav A, Min KS, Wen Feng L, Fuh JYH, Rosa V.

J Biomed Mater Res B Appl Biomater. 2019 May 21. doi: 10.1002/jbm.b.34417. [Epub ahead of print]

PMID:
31112004
3.

Electrohydrodynamic Jet 3D Printed Nerve Guide Conduits (NGCs) for Peripheral Nerve Injury Repair.

Vijayavenkataraman S, Zhang S, Thaharah S, Sriram G, Lu WF, Fuh JYH.

Polymers (Basel). 2018 Jul 8;10(7). pii: E753. doi: 10.3390/polym10070753.

4.

3D-Printed PCL/rGO Conductive Scaffolds for Peripheral Nerve Injury Repair.

Vijayavenkataraman S, Thaharah S, Zhang S, Lu WF, Fuh JYH.

Artif Organs. 2019 May;43(5):515-523. doi: 10.1111/aor.13360. Epub 2018 Nov 12.

PMID:
30229979
5.

Pluronic F127 blended polycaprolactone scaffolds via e-jetting for esophageal tissue engineering.

Wu B, Takeshita N, Wu Y, Vijayavenkataraman S, Ho KY, Lu WF, Fuh JYH.

J Mater Sci Mater Med. 2018 Aug 17;29(9):140. doi: 10.1007/s10856-018-6148-z.

PMID:
30120625
6.

In situ monitoring of selective laser melting using plume and spatter signatures by deep belief networks.

Ye D, Hsi Fuh JY, Zhang Y, Hong GS, Zhu K.

ISA Trans. 2018 Oct;81:96-104. doi: 10.1016/j.isatra.2018.07.021. Epub 2018 Jul 24.

PMID:
30054038
7.

3D bioprinting of tissues and organs for regenerative medicine.

Vijayavenkataraman S, Yan WC, Lu WF, Wang CH, Fuh JYH.

Adv Drug Deliv Rev. 2018 Jul;132:296-332. doi: 10.1016/j.addr.2018.07.004. Epub 2018 Jul 7. Review.

PMID:
29990578
8.

Design and Development of a Topology-Optimized Three-Dimensional Printed Soft Gripper.

Zhang H, Kumar AS, Fuh JYH, Wang MY.

Soft Robot. 2018 Oct;5(5):650-661. doi: 10.1089/soro.2017.0058. Epub 2018 Jul 9.

PMID:
29985781
9.

Effect of Ultrasonic Vibration on Mechanical Properties of 3D Printing Non-Crystalline and Semi-Crystalline Polymers.

Li G, Zhao J, Wu W, Jiang J, Wang B, Jiang H, Fuh JYH.

Materials (Basel). 2018 May 17;11(5). pii: E826. doi: 10.3390/ma11050826.

10.

Fibre-based scaffolding techniques for tendon tissue engineering.

Wu Y, Han Y, Wong YS, Fuh JYH.

J Tissue Eng Regen Med. 2018 Jul;12(7):1798-1821. doi: 10.1002/term.2701. Epub 2018 Jun 19. Review.

PMID:
29757529
11.

Selective Laser Sintering of Porous Silica Enabled by Carbon Additive.

Chang S, Li L, Lu L, Fuh JYH.

Materials (Basel). 2017 Nov 16;10(11). pii: E1313. doi: 10.3390/ma10111313.

12.

Degradation behaviors of geometric cues and mechanical properties in a 3D scaffold for tendon repair.

Wu Y, Wong YS, Fuh JY.

J Biomed Mater Res A. 2017 Apr;105(4):1138-1149. doi: 10.1002/jbm.a.35966. Epub 2017 Feb 8.

PMID:
27886664
13.

Mechanically-enhanced three-dimensional scaffold with anisotropic morphology for tendon regeneration.

Wu Y, Wang Z, Fuh JY, Wong YS, Wang W, Thian ES.

J Mater Sci Mater Med. 2016 Jul;27(7):115. doi: 10.1007/s10856-016-5728-z. Epub 2016 May 23.

PMID:
27215211
14.

Direct E-jet printing of three-dimensional fibrous scaffold for tendon tissue engineering.

Wu Y, Wang Z, Ying Hsi Fuh J, San Wong Y, Wang W, San Thian E.

J Biomed Mater Res B Appl Biomater. 2017 Apr;105(3):616-627. doi: 10.1002/jbm.b.33580. Epub 2015 Dec 16.

PMID:
26671608
15.

Fabrication of three-dimensional porous scaffolds with controlled filament orientation and large pore size via an improved E-jetting technique.

Li JL, Cai YL, Guo YL, Fuh JY, Sun J, Hong GS, Lam RN, Wong YS, Wang W, Tay BY, Thian ES.

J Biomed Mater Res B Appl Biomater. 2014 May;102(4):651-8. doi: 10.1002/jbm.b.33043. Epub 2013 Oct 24.

PMID:
24155124
16.

High resolution UV roll-to-roll nanoimprinting of resin moulds and subsequent replication via thermal nanoimprint lithography.

Dumond JJ, Mahabadi KA, Yee YS, Tan C, Fuh JY, Lee HP, Low HY.

Nanotechnology. 2012 Dec 7;23(48):485310. doi: 10.1088/0957-4484/23/48/485310. Epub 2012 Nov 9.

PMID:
23138479

Supplemental Content

Loading ...
Support Center