Format
Sort by
Items per page

Send to

Choose Destination

Search results

Items: 1 to 20 of 143

1.

Impact of hydrothermal aging on the light transmittance and flexural strength of colored yttria-stabilized zirconia materials of different formulations.

Lümkemann N, Stawarczyk B.

J Prosthet Dent. 2020 Mar 18. pii: S0022-3913(20)30084-6. doi: 10.1016/j.prosdent.2020.01.016. [Epub ahead of print]

PMID:
32199639
2.

Impact of artificial aging by thermocycling on edge chipping resistance and Martens hardness of different dental CAD-CAM restorative materials.

Hampe R, Theelke B, Lümkemann N, Stawarczyk B.

J Prosthet Dent. 2020 Feb 27. pii: S0022-3913(20)30048-2. doi: 10.1016/j.prosdent.2019.12.022. [Epub ahead of print]

PMID:
32115219
3.

Suitability of the new Aryl-Ketone-Polymer indicated for removable partial dentures: Analysis of elastic properties and bond strength to denture resin.

Lümkemann N, Eichberger M, Murphy RJ, Stawarczyk B.

Dent Mater J. 2020 Feb 21. doi: 10.4012/dmj.2019-125. [Epub ahead of print]

4.

Flexural strength, fracture toughness, three-body wear, and Martens parameters of pressable lithium-X-silicate ceramics.

Stawarczyk B, Dinse L, Eichberger M, Jungbauer R, Liebermann A.

Dent Mater. 2020 Mar;36(3):420-430. doi: 10.1016/j.dental.2020.01.009. Epub 2020 Jan 30.

PMID:
32007315
5.

Fracture load of 3D printed PEEK inlays compared with milled ones, direct resin composite fillings, and sound teeth.

Prechtel A, Stawarczyk B, Hickel R, Edelhoff D, Reymus M.

Clin Oral Investig. 2020 Jan 27. doi: 10.1007/s00784-020-03216-5. [Epub ahead of print]

PMID:
31989370
6.

Bond strength between a high-performance thermoplastic and a veneering resin.

Lümkemann N, Eichberger M, Stawarczyk B.

J Prosthet Dent. 2020 Jan 21. pii: S0022-3913(19)30697-3. doi: 10.1016/j.prosdent.2019.10.017. [Epub ahead of print]

PMID:
31980203
7.

Flexural strength and fracture toughness of two different lithium disilicate ceramics.

Stawarczyk B, Liebermann A, Rosentritt M, Povel H, Eichberger M, Lümkemann N.

Dent Mater J. 2020 Mar 31;39(2):302-308. doi: 10.4012/dmj.2019-045. Epub 2019 Dec 19.

8.

Influence of different surface treatments on two-body wear and fracture load of monolithic CAD/CAM ceramics.

Wiedenmann F, Böhm D, Eichberger M, Edelhoff D, Stawarczyk B.

Clin Oral Investig. 2019 Dec 13. doi: 10.1007/s00784-019-03173-8. [Epub ahead of print]

PMID:
31836916
9.

Comparison of various 3D printed and milled PAEK materials: Effect of printing direction and artificial aging on Martens parameters.

Prechtel A, Reymus M, Edelhoff D, Hickel R, Stawarczyk B.

Dent Mater. 2020 Feb;36(2):197-209. doi: 10.1016/j.dental.2019.11.017. Epub 2019 Nov 27.

PMID:
31785832
10.

Influence of Different Cleaning Procedures on Tensile Bond Strength Between Zirconia Abutment and Titanium Base.

Wiedenmann F, Liebermann A, Spintzyk S, Eichberger M, Stawarczyk B.

Int J Oral Maxillofac Implants. 2019 Nov/Dec;34(6):1318-1327. doi: 10.11607/jomi.7638.

PMID:
31711075
11.

Titanium Implant Characteristics After Implantoplasty: An In Vitro Study on Two Different Kinds of Instrumentation.

Sahrmann P, Luso S, Mueller C, Ender A, Attin T, Stawarczyk B, Schmidlin PR.

Int J Oral Maxillofac Implants. 2019 Nov/Dec;34(6):1299-1305. doi: 10.11607/jomi.7410.

PMID:
31711072
12.

Effect of Dentin Bonding Agents, Various Resin Composites and Curing Modes on Bond Strength to Human Dentin.

Steiner R, Edelhoff D, Stawarczyk B, Dumfahrt H, Lente I.

Materials (Basel). 2019 Oct 17;12(20). pii: E3395. doi: 10.3390/ma12203395.

13.

Impact of storage media and temperature on color stability of tooth-colored CAD/CAM materials for final restorations.

Liebermann A, Vehling D, Eichberger M, Stawarczyk B.

J Appl Biomater Funct Mater. 2019 Oct-Dec;17(4):2280800019836832. doi: 10.1177/2280800019836832.

PMID:
31621471
14.
15.

Comparison of fracture toughness measurements for zirconia materials using two test methods.

Jansen JU, Lümkemann N, Sener B, Stawarczyk B.

Dent Mater J. 2019 Oct 2;38(5):806-812. doi: 10.4012/dmj.2018-361. Epub 2019 Aug 22.

16.

Impact of different pretreatments and aging procedures on the flexural strength and phase structure of zirconia ceramics.

Kelch M, Schulz J, Edelhoff D, Sener B, Stawarczyk B.

Dent Mater. 2019 Oct;35(10):1439-1449. doi: 10.1016/j.dental.2019.07.020. Epub 2019 Aug 7.

PMID:
31399228
17.

Fracture load and chewing simulation of zirconia and stainless-steel crowns for primary molars.

Kist S, Stawarczyk B, Kollmuss M, Hickel R, Huth KC.

Eur J Oral Sci. 2019 Aug;127(4):369-375. doi: 10.1111/eos.12645. Epub 2019 Jul 10.

PMID:
31293020
18.

Zirconia and its novel compositions: What do clinicians need to know?

Güth JF, Stawarczyk B, Edelhoff D, Liebermann A.

Quintessence Int. 2019;50(7):512-520. doi: 10.3290/j.qi.a42653.

PMID:
31187100
19.

Fracture load of 3D-printed fixed dental prostheses compared with milled and conventionally fabricated ones: the impact of resin material, build direction, post-curing, and artificial aging-an in vitro study.

Reymus M, Fabritius R, Keßler A, Hickel R, Edelhoff D, Stawarczyk B.

Clin Oral Investig. 2020 Feb;24(2):701-710. doi: 10.1007/s00784-019-02952-7. Epub 2019 May 24.

PMID:
31127429
20.

Different polishing methods for zirconia: impact on surface, optical, and mechanical properties.

Pfefferle R, Lümkemann N, Wiedenmann F, Stawarczyk B.

Clin Oral Investig. 2020 Jan;24(1):395-403. doi: 10.1007/s00784-019-02953-6. Epub 2019 May 18.

PMID:
31102049

Supplemental Content

Loading ...
Support Center