Format

Send to

Choose Destination
Materials (Basel). 2019 Oct 14;12(20). pii: E3350. doi: 10.3390/ma12203350.

Calibration and Verification of Dynamic Particle Flow Parameters by the Back-Propagation Neural Network Based on the Genetic Algorithm: Recycled Polyurethane Powder.

Author information

1
College of Mechanical and Electrical Engineering, Anhui Jianzhu University, Hefei 230601, China. heping@ahjzu.edu.cn.
2
College of Mechanical and Electrical Engineering, Anhui Jianzhu University, Hefei 230601, China. fan0110@ahjzu.edu.cn.
3
College of Mechanical and Electrical Engineering, Anhui Jianzhu University, Hefei 230601, China. panbanglong@ahjzu.edu.cn.
4
College of Mechanical and Electrical Engineering, Anhui Jianzhu University, Hefei 230601, China. zhuyinfeng73@163.com.
5
College of Mechanical and Electrical Engineering, Anhui Jianzhu University, Hefei 230601, China. liujing@ahjzu.edu.cn.
6
College of Mechanical and Electrical Engineering, Anhui Jianzhu University, Hefei 230601, China. zhudarong@ahjzu.edu.cn.

Abstract

The discrete element method (DEM) is commonly used to study various powders in motion during transportation, screening, mixing, etc.; this requires several microscopic parameters to characterize the complex mechanical behavior of the particles. Herein, a new discrete element parameter calibration method is proposed to calibrate the ultrafine agglomerated powder (recycled polyurethane powder). Optimal Latin hypercube sampling and virtual simulation experiments were conducted using the commercial DEM software; the microscopic variables included the static friction coefficient between the particles, collision recovery coefficient, Johnson-Kendall-Roberts surface energy, static friction coefficient between the particles and wall, and collision recovery coefficient. A predictive model based on genetic-algorithm-optimized feedforward neural network (back propagation) was developed to calibrate the microscopic DEM simulation parameters. The cycle search algorithm and mean-shift cluster analysis were used to confirm the input parameters' range by comparing the mean value of the dynamic angle of repose measured via the batch accumulation test. These parameters were verified by the baffle lifting method and the rotating drum method. This calibration method, once successfully developed, will be suitable for use in a variety of fine viscous powder dynamic flow conditions.

KEYWORDS:

discrete element method; dynamic angle of repose; mean-shift clustering analysis; predictive model; ultrafine agglomerated powder

Supplemental Content

Full text links

Icon for Multidisciplinary Digital Publishing Institute (MDPI) Icon for PubMed Central
Loading ...
Support Center