Format

Send to

Choose Destination
Materials (Basel). 2018 Jun 14;11(6). pii: E1015. doi: 10.3390/ma11061015.

Effects of Cutting Edge Microgeometry on Residual Stress in Orthogonal Cutting of Inconel 718 by FEM.

Shen Q1,2, Liu Z3,4, Hua Y5,6, Zhao J7,8, Lv W9,10, Mohsan AUH11,12.

Author information

1
School of Mechanical Engineering, Shandong University, Jinan 250061, China. 201612804@mail.sdu.edu.cn.
2
Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE/Key National Demonstration Center for Experimental Mechanical Engineering Education, Jinan 250061, China. 201612804@mail.sdu.edu.cn.
3
School of Mechanical Engineering, Shandong University, Jinan 250061, China. melius@sdu.edu.cn.
4
Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE/Key National Demonstration Center for Experimental Mechanical Engineering Education, Jinan 250061, China. melius@sdu.edu.cn.
5
School of Mechanical Engineering, Shandong University, Jinan 250061, China. sduhuayang@gmail.com.
6
Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE/Key National Demonstration Center for Experimental Mechanical Engineering Education, Jinan 250061, China. sduhuayang@gmail.com.
7
School of Mechanical Engineering, Shandong University, Jinan 250061, China. sduzhaojinfu@gmail.com.
8
Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE/Key National Demonstration Center for Experimental Mechanical Engineering Education, Jinan 250061, China. sduzhaojinfu@gmail.com.
9
School of Mechanical Engineering, Shandong University, Jinan 250061, China. sdulvwoyun@gmail.com.
10
Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE/Key National Demonstration Center for Experimental Mechanical Engineering Education, Jinan 250061, China. sdulvwoyun@gmail.com.
11
School of Mechanical Engineering, Shandong University, Jinan 250061, China. hassansdu@yahoo.com.
12
Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE/Key National Demonstration Center for Experimental Mechanical Engineering Education, Jinan 250061, China. hassansdu@yahoo.com.

Abstract

Service performance of components such as fatigue life are dramatically influenced by the machined surface and subsurface residual stresses. This paper aims at achieving a better understanding of the influence of cutting edge microgeometry on machined surface residual stresses during orthogonal dry cutting of Inconel 718. Numerical and experimental investigations have been conducted in this research. The cutting edge microgeometry factors of average cutting edge radius S¯, form-factor K, and chamfer were investigated. An increasing trend for the magnitudes of both tensile and compressive residual stresses was observed by using larger S¯ or introducing a chamfer on the cutting edges. The ploughing depth has been predicted based on the stagnation zone. The increase of ploughing depth means that more material was ironed on the workpiece subsurface, which resulted in an increase in the compressive residual stress. The thermal loads were leading factors that affected the surface tensile residual stress. For the unsymmetrical honed cutting edge with K = 2, the friction between tool and workpiece and tensile residual stress tended to be high, while for the unsymmetrical honed cutting edge with K = 0.5, the high ploughing depth led to a higher compressive residual stress. This paper provides guidance for regulating machine-induced residual stress by edge preparation.

KEYWORDS:

Inconel 718; cutting edge microgeometry; cutting edge preparation; finite element model; residual stress

Supplemental Content

Full text links

Icon for Multidisciplinary Digital Publishing Institute (MDPI) Icon for PubMed Central
Loading ...
Support Center