There is a need for accurate surface area measurement of internal irregular anatomical structures in order to define light dosimetry in adjunctive intraoperative photodynamic therapy (AIOPDT). No satisfactory preoperative method exists of measuring this parameter. We have investigated whether computer-assisted triangulation of serial sections generated by computed tomography (CT) scanning can give an accurate assessment of the surface area of the walls of the true pelvis after anterior resection and before colorectal anastomosis. We have shown that the technique of paper density tessellation is an acceptable method of measuring the surface areas of phantom objects, with a maximum error of 0.5%, and is used as the gold standard. Computer-assisted triangulation of CT images of standard geometric objects and accurately-constructed pelvic phantoms gives a surface area assessment with a maximum error of 2.5% compared with the gold standard. The CT images of 20 patients' pelves have been analysed by computer-assisted triangulation and this shows that the surface area of the walls varies from 143 cm2 to 392 cm2. Simple step-like analysis of images and approximation to geometric shapes with subsequent calculation give unacceptably high errors. The surface area of an internal, rigid, irregular surface area for illumination in AIOPDT can be accurately measured preoperatively by computer-assisted triangulation of CT images.