Commissioning of high current H+/D+ ion beams for the prototype accelerator of the International Fusion Materials Irradiation Facility

Rev Sci Instrum. 2020 Feb 1;91(2):023321. doi: 10.1063/1.5129598.

Abstract

The Linear IFMIF (International Fusion Materials Irradiation Facility) Prototype Accelerator (LIPAc) is aiming at demonstrating the low energy section of a 40 MeV/125 mA IFMIF deuteron accelerator up to 9 MeV with a full beam current in cw operation. For such a high-power beam, the LIPAc injector is required to produce a 100 keV D+ beam with 140 mA and match it for injection into the Radio Frequency Quadrupole (RFQ) accelerator. The injector is designed by CEA-Saclay based on the high intensity light ion source (SILHI). In 2019, the commissioning of the RFQ to demonstrate the D+ beam acceleration at a low duty cycle (0.1%) was conducted. A nominal beam current of 125 mA D+ beam was accelerated up to 5 MeV through the RFQ successfully. The LIPAc injector fully satisfied the requirements for RFQ beam commissioning at the pulse mode.