Format

Send to

Choose Destination
J Orthop Surg Res. 2018 Nov 19;13(1):289. doi: 10.1186/s13018-018-1000-1.

Optimal position of lipped acetabular liners to improve stability in total hip arthroplasty-an intraoperative in vivo study.

Author information

1
Department of Orthopaedic Surgery, Box Hill Hospital, Eastern Health, 8 Arnold Street, Box Hill, Melbourne, VIC, 3128, Australia.
2
Department of Orthopaedic Surgery, Northern Health, Melbourne, 185 Cooper St, Epping, Melbourne, VIC, 3076, Australia.
3
Monash University, Melbourne, Wellington Road, Clayton, Melbourne, VIC, 3800, Australia.
4
Epworth Eastern Hospital, Melbourne, 1 Arnold St, Box Hill, Melbourne, VIC, 3128, Australia.
5
Department of Orthopaedic Surgery, Box Hill Hospital, Eastern Health, 8 Arnold Street, Box Hill, Melbourne, VIC, 3128, Australia. kemble.wang@gmail.com.

Abstract

BACKGROUND:

Lipped or elevated acetabular liners are frequently used in total hip arthroplasty to improve stability. However, the optimal position of the lip is not known. The purpose of this study was to determine the optimal position of lipped acetabular liners in total hip arthroplasty performed with a posterior approach.

METHODS:

In 14 hips, lipped trial liners were placed intraoperatively in various positions around the posterior clock-face of the implanted acetabular shell component. For each liner position, stability of the hip was tested at maximal hip flexion with gradually increasing internal rotation until subluxation occurred, at which point the position of the hip was measured using smartphone accelerometer-based goniometers. Smartphone goniometers were first validated against a computer-assisted navigation system. Post-operative radiographs were analyzed for cup inclination angle, cup anteversion angle, and femoral offset.

RESULTS:

Mean cup inclination angle in our series was 31° ± 6°. The most common liner position that imparted the greatest stability to posterior subluxation was posteriorly and inferiorly (4 o'clock position for left hip, or 8 o'clock position for right hip). The range for most stable liner position for different patients varied from postero-superior (11 o'clock/1 o'clock position) to directly inferior (6 o'clock position). Comparing a non-lipped liner to a lipped liner placed in the optimal position, the average difference in internal rotation gained before dislocation was 23°. There was no association between cup inclination or anteversion angle with liner position of greatest stability.

CONCLUSION:

In hip replacements performed through a posterior approach and with mean cup inclination angle of 31° ± 6°, placing the lip of the elevated liner in the postero-inferior quadrant may impart more stability than in the postero-superior quadrant.

KEYWORDS:

Elevated liner; Instability; Total hip arthroplasty

PMID:
30453985
PMCID:
PMC6245846
DOI:
10.1186/s13018-018-1000-1
[Indexed for MEDLINE]
Free PMC Article

Supplemental Content

Full text links

Icon for BioMed Central Icon for PubMed Central
Loading ...
Support Center