Format

Send to

Choose Destination
J Prosthet Dent. 2018 Oct;120(4):546-552. doi: 10.1016/j.prosdent.2017.12.003. Epub 2018 Apr 25.

Color change of CAD-CAM materials and composite resin cements after thermocycling.

Author information

1
Postgraduate student, Department of Prosthodontics, Faculty of Dentistry, Bezmialem Vakif University, Istanbul, Turkey. Electronic address: isilgurdal@gmail.com.
2
Assistant Professor, Department of Prosthodontics, Faculty of Dentistry, Altinbas University, Istanbul, Turkey.
3
Dental Technician, Department of Prosthodontics, Dental School, Ludwig Maximilian University, Munich, Germany.
4
Professor, Department of Prosthodontics, Dental School, Ege University, Izmir, Turkey.
5
Professor, Dental Plus Clinic, Istanbul, Turkey.
6
Head, Dental Materials Unit, Department of Prosthodontics, Dental School, Ludwig Maximilian University, Munich, Germany.

Abstract

STATEMENT OF PROBLEM:

The color of resin cements and computer-aided-design and computer-aided-manufacturing (CAD-CAM) restorations may change with aging.

PURPOSE:

The purpose of this in vitro study was to analyze the influence of thermocycling on the color of CAD-CAM materials with underlying resin cement.

MATERIAL AND METHODS:

Seven different CAD-CAM materials, composite resins and glass-ceramics were cut into 0.7-mm and 1.2-mm thicknesses (n=10) and cemented with a dual-polymerizing resin cement, a light-polymerizing resin cement, and a preheated composite resin (N=420). Color values were measured by using spectrophotometry. Specimens were subjected to thermocycling (5°C and 55°C; 5000 cycles). The measured color difference (ΔE) data were analyzed by using descriptive statistics. Normality of data distribution was tested by using the Kolmogorov-Smirnov test. Three-way and 1-way ANOVA followed by the Scheffé post hoc test and unpaired 2-sample Student t test were computed to determine the significant differences among the tested parameters (α=.05).

RESULTS:

ΔE values were significantly influenced by the CAD-CAM material (ηp2=0.85, P<.001) and the resin composite cement (ηP2=0.03, P=.003) but were not influenced by thickness (P=.179). Significant interactions were present among thickness, cement, and CAD-CAM materials (P<.001). Vita Suprinity and GC Cerasmart showed significantly the lowest ΔE values (P<.001). The highest ΔE values were observed for IPS Empress CAD. The dual-polymerizing resin cement showed significantly lower ΔE values than the preheated composite resin (P=.003).

CONCLUSIONS:

Restoration materials and composite resin cement types used for cementation influence the amount of color change due to aging.

PMID:
29703672
DOI:
10.1016/j.prosdent.2017.12.003
[Indexed for MEDLINE]

Supplemental Content

Full text links

Icon for Elsevier Science
Loading ...
Support Center