Format

Send to

Choose Destination
Environ Sci Technol. 2018 May 1;52(9):5154-5160. doi: 10.1021/acs.est.8b00966. Epub 2018 Apr 18.

Emissions of Tetrachlorobiphenyls (PCBs 47, 51, and 68) from Polymer Resin on Kitchen Cabinets as a Non-Aroclor Source to Residential Air.

Author information

1
Department of Civil and Environmental Engineering, IIHR-Hydroscience and Engineering , The University of Iowa , Iowa City , Iowa 52242 , United States.

Abstract

Both Aroclor and non-Aroclor sources of airborne polychlorinated biphenyls (PCBs) were found in residential homes. We deployed passive air samplers at 16 residences and found PCB-47, PCB-51, and PCB-68 to account for up to 50% of measured indoor ΣPCBs (2700 pg m-3). Although PCB-47 and PCB-51 are neurotoxins present in Aroclor mixtures (<2.5 and <0.3 wt %, respectively), we found them at much higher levels than expected for any Aroclor source. PCB-68 is not present in Aroclor mixtures. Another non-Aroclor congener, PCB-11, a byproduct of pigment manufacturing, was found inside and outside of every household and was frequently the predominate congener. We conducted direct measurements of surface emissions and identified finished cabinetry to be a major source of PCB-47, PCB-51, and PCB-68. We hypothesize that these congeners are inadvertent byproducts of polymer sealant manufacturing and produced from the decomposition of 2,4-dichlorobenzoyl peroxide used as an initiator in free-radical polymerization of polyester resins. The presence of these three compounds in polymer products, such as silicone, has been widely noted, but to our knowledge they have never been shown to be a significant environmental source of PCBs.

PMID:
29667399
PMCID:
PMC6272057
[Available on 2019-05-01]
DOI:
10.1021/acs.est.8b00966

Supplemental Content

Full text links

Icon for American Chemical Society
Loading ...
Support Center