Format

Send to

Choose Destination
J Occup Environ Hyg. 2018 Jan;15(1):63-70. doi: 10.1080/15459624.2017.1388512.

Measurement of area and personal breathing zone concentrations of diesel particulate matter (DPM) during oil and gas extraction operations, including hydraulic fracturing.

Author information

1
a National Institute for Occupational Safety and Health (NIOSH), Western States Division , Denver , Colorado.
2
b University of the Witwatersrand, School of Public Health, Faculty of Health Sciences , Johannesburg , South Africa.
3
c National Institute for Occupational Safety and Health (NIOSH), Division of Applied Research and Technology , Cincinnati , Ohio.

Abstract

Diesel engines serve many purposes in modern oil and gas extraction activities. Diesel particulate matter (DPM) emitted from diesel engines is a complex aerosol that may cause adverse health effects depending on exposure dose and duration. This study reports on personal breathing zone (PBZ) and area measurements for DPM (expressed as elemental carbon) during oil and gas extraction operations including drilling, completions (which includes hydraulic fracturing), and servicing work. Researchers at the National Institute for Occupational Safety and Health (NIOSH) collected 104 full-shift air samples (49 PBZ and 55 area) in Colorado, North Dakota, Texas, and New Mexico during a four-year period from 2008-2012. The arithmetic mean (AM) of the full shift TWA PBZ samples was 10 µg/m3; measurements ranged from 0.1-52 µg/m3. The geometric mean (GM) for the PBZ samples was 7 µg/m3. The AM of the TWA area measurements was 17 µg/m3 and ranged from 0.1-68 µg/m3. The GM for the area measurements was 9.5 µg/m3. Differences between the GMs of the PBZ samples and area samples were not statistically different (P > 0.05). Neither the Occupational Safety and Health Administration (OSHA), NIOSH, nor the American Conference of Governmental Industrial Hygienists (ACGIH) have established occupational exposure limits (OEL) for DPM. However, the State of California, Department of Health Services lists a time-weighted average (TWA) OEL for DPM as elemental carbon (EC) exposure of 20 µg/m3. Five of 49 (10.2%) PBZ TWA measurements exceeded the 20 µg/m3 EC criterion. These measurements were collected on Sandmover and Transfer Belt (T-belt) Operators, Blender and Chemical Truck Operators, and Water Transfer Operators during hydraulic fracturing operations. Recommendations to minimize DPM exposures include elimination (locating diesel-driven pumps away from well sites), substitution, (use of alternative fuels), engineering controls using advanced emission control technologies, administrative controls (configuration of well sites), hazard communication, and worker training.

KEYWORDS:

Diesel exhaust; diesel particulate matter; elemental carbon; exposure assessment; hydraulic fracturing; oil and gas extraction

Supplemental Content

Full text links

Icon for PubMed Central
Loading ...
Support Center