Format

Send to

Choose Destination
Data Brief. 2017 May 19;13:137-144. doi: 10.1016/j.dib.2017.05.030. eCollection 2017 Aug.

Experimental data on compressive strength and durability of sulfur concrete modified by styrene and bitumen.

Author information

1
Faculty of Civil Engineering, Babol Noshirvani University of Technology, Babol, Iran.

Abstract

In this data article experimental data on the compressive strength, and the durability of styrene and bitumen modified sulfur concrete against acidic water and ignition are presented. The percent of the sulfur cement and the gradation of the aggregates used are according to the ACI 548.2R-93 and ASTM 3515 respectively. For the styrene modified sulfur concrete different percentages of styrene are used. Also for the bitumen modified sulfur concrete, different percentages of bitumen and the emulsifying agent (triton X-100) are utilized. From each batch three 10×10×10 cm cubic samples were casted. One of the samples was used for the compressive strength on the second day of casting, and one on the twenty-eighth day. Then the two samples were put under the high pressure flame of the burning liquid gas for thirty seconds and their ignition resistances were observed. The third sample was put into the acidic water and after twenty eight days immersion in water was dried in the ambient temperature. After drying its compressive strength has been evaluated.

KEYWORDS:

Acid resistance; Bitumen; Compressive strength; Ignition; Styrene; Sulfur concrete

Supplemental Content

Full text links

Icon for Elsevier Science Icon for PubMed Central
Loading ...
Support Center