Format

Send to

Choose Destination
J Neuroeng Rehabil. 2015 Sep 18;12:83. doi: 10.1186/s12984-015-0072-y.

Design and pilot validation of A-gear: a novel wearable dynamic arm support.

Author information

1
Department of Physics and Medical Technology, VU Medical Center, Amsterdam, The Netherlands. p.kooren@vumc.nl.
2
Department of Precision & Microsystems Engineering, Delft University of Technology, Delft, The Netherlands. a.g.dunning@tudelft.nl.
3
Department of Biomechanical Engineering, Delft University of Technology, Delft, The Netherlands. a.g.dunning@tudelft.nl.
4
Department of Rehabilitation, Donders Center for Neuroscience, Radboud University Medical Center, Nijmegen, The Netherlands. mariska.janssen@radboudumc.nl.
5
Department of Biomechanical Engineering, University of Twente, Enschede, The Netherlands. j.loboprat@utwente.nl.
6
Department of Biomechanical Engineering, University of Twente, Enschede, The Netherlands. h.f.j.m.koopman@utwente.nl.
7
Department of Physics and Medical Technology, VU Medical Center, Amsterdam, The Netherlands. mi.paalman@vumc.nl.
8
Department of Rehabilitation, Donders Center for Neuroscience, Radboud University Medical Center, Nijmegen, The Netherlands. imelda.degroot@radboudumc.nl.
9
Department of Precision & Microsystems Engineering, Delft University of Technology, Delft, The Netherlands. j.l.herder@tudelft.nl.
10
Department of Mechanical Automation, University of Twente, Enschede, The Netherlands. j.l.herder@tudelft.nl.

Abstract

BACKGROUND:

Persons suffering from progressive muscular weakness, like those with Duchenne muscular dystrophy (DMD), gradually lose the ability to stand, walk and to use their arms. This hinders them from performing daily activities, social participation and being independent. Wheelchairs are used to overcome the loss of walking. However, there are currently few efficient functional substitutes to support the arms. Arm supports or robotic arms can be mounted to wheelchairs to aid in arm motion, but they are quite visible (stigmatizing), and limited in their possibilities due to their fixation to the wheelchair. The users prefer inconspicuous arm supports that are comfortable to wear and easy to control.

METHODS:

In this paper the design, characterization, and pilot validation of a passive arm support prototype, which is worn on the body, is presented. The A-gear runs along the body from the contact surface between seat and upper legs via torso and upper arm to the forearm. Freedom of motion is accomplished by mechanical joints, which are nearly aligned with the human joints. The system compensates for the arm weight, using elastic bands for static balance, in every position of the arm. As opposed to existing devices, the proposed kinematic structure allows trunk motion and requires fewer links and less joint space without compromising balancing precision. The functional prototype has been validated in three DMD patients, using 3D motion analysis.

RESULTS:

Measurements have shown increased arm performance when the subjects were wearing the prototype. Upward and forward movements were easier to perform. The arm support is easy to put on and remove. Moreover, the device felt comfortable for the subjects. However, downward movements were more difficult, and the patients would prefer the device to be even more inconspicuous.

CONCLUSION:

The A-gear prototype is a step towards inconspicuousness and therefore well-received dynamic arm supports for people with muscular weakness.

PMID:
26385658
PMCID:
PMC4575491
DOI:
10.1186/s12984-015-0072-y
[Indexed for MEDLINE]
Free PMC Article

Supplemental Content

Full text links

Icon for BioMed Central Icon for PubMed Central
Loading ...
Support Center