Format

Send to

Choose Destination
Rev Sci Instrum. 2015 Aug;86(8):083305. doi: 10.1063/1.4928069.

Infrared imaging diagnostics for intense pulsed electron beam.

Author information

1
School of Physics and Nuclear Energy Engineering, Beihang University, Beijing 100191, People's Republic of China.
2
Institute of Heavy Ion Physics, Peking University, Beijing 100871, People's Republic of China.

Abstract

Infrared imaging diagnostic method for two-dimensional calorimetric diagnostics has been developed for intense pulsed electron beam (IPEB). By using a 100-μm-thick tungsten film as the infrared heat sink for IPEB, the emitting uniformity of the electron source can be analyzed to evaluate the efficiency and stability of the diode system. Two-dimensional axisymmetric finite element method heat transfer simulation, combined with Monte Carlo calculation, was performed for error estimation and optimization of the method. The test of the method was finished with IPEB generated by explosive emission electron diode with pulse duration (FWHM) of 80 ns, electron energy up to 450 keV, and a total beam current of over 1 kA. The results showed that it is possible to measure the cross-sectional energy density distribution of IPEB with energy sensitivity of 0.1 J/cm(2) and spatial resolution of 1 mm. The technical details, such as irradiation protection of bremsstrahlung γ photons and the functional extensibility of the method were discussed in this work.

PMID:
26329179
DOI:
10.1063/1.4928069

Supplemental Content

Full text links

Icon for American Institute of Physics
Loading ...
Support Center