Format

Send to

Choose Destination
Rev Sci Instrum. 2014 Dec;85(12):123108. doi: 10.1063/1.4903356.

Digital signal processor-based high-precision on-line Voigt lineshape fitting for direct absorption spectroscopy.

Author information

1
Ministry of Education's Key Laboratory of Precision Opto-mechatronics Technology, School of Instrumentation and Opto-Electronic Engineering, Beihang University, Beijing 100191, China.
2
Department of Chemical Engineering and Biotechnology, University of Cambridge, Cambridge CB2 3RA, United Kingdom.

Abstract

To realize on-line high-accuracy measurement in direct absorption spectroscopy (DAS), a system-on-chip, high-precision digital signal processor-based on-line Voigt lineshape fitting implementation is introduced in this paper. Given that the Voigt lineshape is determined by the Gauss full width at half maximum (FWHM) and Lorentz FWHM, a look-up table, which covers a range of combinations of both, is first built to achieve rapid and accurate calculation of Voigt lineshape. With the look-up table and raw absorbance data in hand, Gauss-Newton nonlinear fitting module is implemented to obtain the parameters including both the Gauss and Lorentz FWHMs, which can be used to calculate the integrated absorbance. To realize the proposed method in hardware, a digital signal processor (DSP) is adopted to fit the Voigt lineshape in a real-time DAS measurement system. In experiment, temperature and H2O concentration of a flat flame are recovered from the transitions of 7444.36 cm(-1) and 7185.6 cm(-1) by the DSP-based on-line Voigt lineshape fitting and on-line integral of the raw absorbance, respectively. The results show that the proposed method can not only fit the Voigt lineshape on-line but also improve the measurement accuracy compared with those obtained from the direct integral of the raw absorbance.

PMID:
25554273
DOI:
10.1063/1.4903356

Supplemental Content

Full text links

Icon for American Institute of Physics
Loading ...
Support Center