Format

Send to

Choose Destination
See comment in PubMed Commons below
ACS Appl Mater Interfaces. 2014 Mar 26;6(6):3888-95. doi: 10.1021/am404858z. Epub 2014 Mar 4.

Humidity-sensing properties of urchinlike CuO nanostructures modified by reduced graphene oxide.

Author information

1
State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University , 2699 Qianjin Street, Changchun 130012, People's Republic of China.

Abstract

Urchinlike CuO modified by reduced graphene oxide (rGO) was synthesized by a one-pot microwave-assisted hydrothermal method. The as-prepared composites were characterized using various characterization methods. A humidity sensor based on the CuO/rGO composites was fabricated and tested. The results revealed that the sensor based on the composites showed much higher impedance than pure CuO. Compared with the sensors based on pristine rGO and CuO, the sensor fabricated with the composites exhibited relatively good humidity-sensing performance in terms of response time and response value. The humidity-sensing mechanism was also briefly introduced. The enlargement of the impedance and improvement of the humidity-sensing properties are briefly explained by the Schottky junction theory.

PMID:
24456151
DOI:
10.1021/am404858z
PubMed Commons home

PubMed Commons

0 comments

    Supplemental Content

    Full text links

    Icon for American Chemical Society
    Loading ...
    Support Center