Send to

Choose Destination
See comment in PubMed Commons below
Dent Mater J. 2013;32(4):622-7.

Influence of different adherend materials and combinations on in vitro shear bond strength.

Author information

Department of Prosthodontics, School of Stomatology, Fourth Military Medical University, Xi’an 710032, China.


The influence of different adherend and substrate materials on shear bond strength (SBS) test was estimated. Ceramic plates (IPS e.max press) were cut, polished, abraded, and applied with two resin cements (Panavia F/Biscem). The SBS values of 30 groups were measured. The groups consisted of five combinations of adherend and substrate materials for each adhesive system and three different bonded areas (2, 4, and 6 mm diameter) for each combination. The failure modes were examined using a stereomicroscope. Groups with ceramic adherends showed higher SBS values in both adhesive systems and all three bonded areas. Small bonded areas are associated with significantly high SBS values. Groups with similar bonded areas and high SBS values showed more mixed or cohesive failures. Groups with small bonded areas and high SBS values had more interfacial failures. Adherend and substrate material significantly influenced the in vitro SBS value.

[Indexed for MEDLINE]
Free full text
PubMed Commons home

PubMed Commons

How to join PubMed Commons

    Supplemental Content

    Full text links

    Icon for J-STAGE, Japan Science and Technology Information Aggregator, Electronic
    Loading ...
    Support Center