Format

Send to

Choose Destination
Environ Technol. 2013 Mar-Apr;34(5-8):719-29.

Treatment of textile dye wastewaters using ferrous sulphate in a chemical coagulation/flocculation process.

Author information

1
LSRE - Laboratório de Processos de Separação e Reacção, Departamento de Engenharia Química, Faculdade de Engenharia, Universidade do Porto, R. Dr. Roberto Frias, 4200-465 Porto, Portugal.

Abstract

The coagulation/flocculation treatment using FeSO4 x 7H2O as a coagulant is evaluated in this work for the removal of organic compounds and colour from synthetic effluents simulating the cotton, acrylic and polyester dyeing wastewaters. The coagulant dose, temperature, pH, stirring speed and stirring time that maximized the removal of dissolved organic carbon (DOC) and colour for each effluent are determined for the coagulation process. The effect of the stirring speed, stirring time and the dose of flocculant (Magnafloc 155 or Superfloc C-573) on the flocculation stage is also evaluated for effluents pretreated by coagulation at the optimal conditions previously determined. The obtained results showed that the optimal operating conditions are different for each effluent, and the process (coagulation/flocculation) as a whole was efficient in terms of colour removal (-91% for cotton, -94% for acrylic effluents; polyester effluent is practically colourless). However, the DOC removal observed is not significant (33% for polyester, -45% for cotton and -28% for acrylic effluents). On the other hand, the remaining dissolved iron content is appropriate for further integrating the treatment with an iron-catalysed Fenton process, thus reducing the consumption of chemicals in the overall treatment.

PMID:
23837323
DOI:
10.1080/09593330.2012.715679
[Indexed for MEDLINE]

Supplemental Content

Full text links

Icon for Taylor & Francis
Loading ...
Support Center