Mode area scaling with all-solid photonic bandgap fibers

Opt Express. 2012 Nov 19;20(24):26363-72. doi: 10.1364/OE.20.026363.

Abstract

There are still very strong interests for power scaling in high power fiber lasers for a wide range of applications in medical, industry, defense and science. In many of these lasers, fiber nonlinearities are the main limits to further scaling. Although numerous specific techniques have studied for the suppression of a wide range of nonlinearities, the fundamental solution is to scale mode areas in fibers while maintaining sufficient single mode operation. Here the key problem is that more modes are supported once physical dimensions of waveguides are increased. The key to solve this problem is to look for fiber designs with significant higher order mode suppression. In conventional waveguides, all modes are increasingly guided in the center of the waveguides when waveguide dimensions are increased. It is hard to couple a mode out in order to suppress its propagation, which severely limits their scalability. In an all-solid photonic bandgap fiber, modes are only guided due to anti-resonance of cladding photonic crystal lattice. This provides strongly mode-dependent guidance, leading to very high differential mode losses. In addition, the all-solid nature of the fiber makes it easily spliced to other fibers. In this paper, we will show for the first time that all-solid photonic bandgap fibers with effective mode area of ~920?m2 can be made with excellent higher order mode suppression.

Publication types

  • Comparative Study
  • Research Support, U.S. Gov't, Non-P.H.S.

MeSH terms

  • Computer-Aided Design*
  • Equipment Design
  • Humans
  • Light*
  • Optical Fibers*
  • Photons*
  • Scattering, Radiation*
  • Surface Plasmon Resonance / instrumentation*