Format

Send to

Choose Destination
Ann Biomed Eng. 2011 Dec;39(12):2984-97. doi: 10.1007/s10439-011-0409-z. Epub 2011 Sep 24.

Development, validation, and application of a parametric pediatric head finite element model for impact simulations.

Author information

1
University of Michigan Transportation Research Institute, Ann Arbor, MI, USA.

Erratum in

  • Ann Biomed Eng. 2013 Jan;41(1):215-20.

Abstract

In this study, a statistical model of cranium geometry for 0- to 3-month-old children was developed by analyzing 11 CT scans using a combination of principal component analysis and multivariate regression analysis. Radial basis function was used to morph the geometry of a baseline child head finite element (FE) model into models with geometries representing a newborn, a 1.5-month-old, and a 3-month-old infant head. These three FE models were used in a parametric study of near-vertex impact conditions to quantify the sensitivity of different material parameters. Finally, model validation was conducted against peak head accelerations in cadaver tests under different impact conditions, and optimization techniques were used to determine the material properties. The results showed that the statistical model of cranium geometry produced realistic cranium size and shape, suture size, and skull/suture thickness, for 0- to 3-month-old children. The three pediatric head models generated by morphing had mesh quality comparable to the baseline model. The elastic modulus of skull had a greater effect on most head impact response measurements than other parameters. Head geometry was a significant factor affecting the maximal principal stress of the skull (p = 0.002) and maximal principal strain of the suture (p = 0.021) after controlling for the skull material. Compared with the newborn head, the 3-month-old head model produced 6.5% higher peak head acceleration, 64.8% higher maximal principal stress, and 66.3% higher strain in the suture. However, in the skull, the 3-month-old model produced 25.7% lower maximal principal stress and 11.5% lower strain than the newborn head. Material properties of the brain had little effects on head acceleration and strain/stress within the skull and suture. Elastic moduli of the skull, suture, dura, and scalp determined using optimization techniques were within reported literature ranges and produced impact response that closely matched those measured in previous cadaver tests. The method developed in this study made it possible to investigate the age effects from geometry changes on pediatric head impact responses. The parametric study demonstrated that it is important to consider the material properties and geometric variations together when estimating pediatric head responses and predicting head injury risks.

PMID:
21947736
DOI:
10.1007/s10439-011-0409-z
[Indexed for MEDLINE]

Supplemental Content

Full text links

Icon for Springer
Loading ...
Support Center