Format

Send to

Choose Destination
Open Orthop J. 2011;5:229-38. doi: 10.2174/1874325001105010229. Epub 2011 Jul 19.

Large diameter femoral heads impose significant alterations on the strains developed on femoral component and bone: a finite element analysis.

Author information

1
School of Mechanical Engineering, Mechanical Design & Control Systems Section, Laboratory of Dynamics and Structures, National Technical University of Athens, Greece.

Abstract

Total Hip Arthroplasty aims at fully recreating a functional hip joint. Over the past years modular implant systems have become common practice and are widely used, due to the surgical options they provide. In addition Big Femoral Heads have also been implemented in the process, providing more flexibility for the surgeon. The current study aims at investigating the effects that femoral heads of bigger diameter may impose on the mechanical behavior of the bone-implant assembly. Using data acquired by Computed Tomographies and a Coordinate Measurement Machine, a cadaveric femur and a Profemur-E modular stem were fully digitized, leading to a three dimensional finite element model in ANSYS Workbench. Strains and stresses were then calculated, focusing on areas of clinical interest, based on Gruen zones: the calcar and the corresponding below the greater trochanter area in the proximal femur, the stem tip region and a profile line along linea aspera. The performed finite elements analysis revealed that the use of large diameter heads produces significant changes in strain development within the bone volume, especially in the lateral side. The application of Frost's law in bone remodeling, validated the hypothesis that for all diameters normal bone growth occurs. However, in the calcar area lower strain values were recorded, when comparing with the reference model featuring a 28mm femoral head. Along line aspera and for the stem tip area, higher values were recorded. Finally, stresses calculated on the modular neck revealed increased values, but without reaching the yield strength of the titanium alloy used.

KEYWORDS:

Total hip arthroplasty; finite elements.; large diameter femoral heads; metal-on-metal

Supplemental Content

Full text links

Icon for PubMed Central
Loading ...
Support Center