A biosensor prepared by co-entrapment of a glucose oxidase and a carbon nanotube within an electrochemically deposited redox polymer multilayer

Bioelectrochemistry. 2011 Jun;81(2):109-13. doi: 10.1016/j.bioelechem.2011.04.003. Epub 2011 Apr 23.

Abstract

A glucose biosensor based on a nanocomposite made by layer-by-layer electrodeposition of the redox polymer into a multilayer containing glucose oxidase (GOx) and single-walled carbon nanotubes (SWCNT) on a screen-printed carbon electrode (SPCE) surface was developed. The objectives of the electrodeposition of redox polymer are to stabilize further the multilayer using a coordinative cross-linked redox polymer and to wire the GOx. The electrochemistry of the layer-by-layer assembly of the GOx/SWCNT/redox polymer nanocomposite was followed by cyclic voltammetry. The resultant biosensor provided stable and reproducible electrocatalytic responses to glucose, and the electrocatalytic current for glucose oxidation was enhanced with an increase in the number of layers. The biosensor displayed a linear range from 0.5 to 6.0mM, a sensitivity of 16.4μA/(mMcm(2)), and a response time of about 5s. It shows no response to 0.05mM of ascorbic acid, 0.32mM of uric acid and 0.20mM of acetaminophen using a Nafion membrane covering the nanocomposite-modified electrode surface.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Biosensing Techniques / instrumentation*
  • Electrochemistry
  • Electrodes
  • Electroplating / instrumentation*
  • Enzymes, Immobilized
  • Glucose / analysis*
  • Glucose Oxidase / chemistry*
  • Nanocomposites / chemistry
  • Nanotubes, Carbon / chemistry*
  • Oxidation-Reduction
  • Polymers / chemistry*
  • Sensitivity and Specificity

Substances

  • Enzymes, Immobilized
  • Nanotubes, Carbon
  • Polymers
  • Glucose Oxidase
  • Glucose