Format

Send to

Choose Destination
Water Sci Technol. 2009;59(10):2017-27. doi: 10.2166/wst.2009.165.

Treatment of olive-mill wastewater from a two-phase process by chemical oxidation on an industrial scale.

Author information

1
Chemical Engineering Department, Granada University, 18071 Granada, Spain.

Abstract

This study offers a solution for reducing the environmental effect of wastewaters generated by the olive-oil industry. Olive-oil companies produce variable quantities of wastewaters, which require treatment for disposal or reuse. Today, regulations are becoming increasingly strict regarding the parameters measured in these effluents. In Spain, the resolution by the president of the Hydrographical Confederation of the Guadalquivir on water use 2004 set parameter limits as follows: pH = 6.0-9.0, total suspended solid = 500 mg/L; and COD and BOD(5) (20)=1,500 mg O(2)/L. For the year 2006, maximum values for COD and BOD(5) (20) were fixed at 1,000 mg O(2)/L. To solve this problem, a study has been made to derive irrigation water from the above-mentioned effluents through chemical oxidation based on the Fenton's process. This would be first step towards using a closed-circuit system in olive-oil mills to treat and reuse effluents.

PMID:
19474497
DOI:
10.2166/wst.2009.165
[Indexed for MEDLINE]

Supplemental Content

Full text links

Icon for Silverchair Information Systems
Loading ...
Support Center