Format

Send to

Choose Destination
J Hand Surg Am. 2009 Apr;34(4):677-84. doi: 10.1016/j.jhsa.2009.01.011.

A computational approach to the "optimal" screw axis location and orientation in the scaphoid bone.

Author information

1
Department of Orthopaedics, Bioengineering Laboratory, The Warren Alpert Medical School of Brown University, Rhode Island Hospital, Providence, RI 02903, USA.

Abstract

PURPOSE:

The development of small cannulated screws permitted minimally invasive percutaneous fixation of acute scaphoid fractures. There are known mechanical advantages to increased screw length and central screw placement, as well as documented deleterious effects of screw malposition, including articular protrusion, proximal pole fracture, and nonunion. The purpose of this study was to compare 2 methods of calculating a screw axis accessible via a volar surgical approach.

METHODS:

To prevent screw protrusion through the surface of the scaphoid, we required the central screw axis to be contained completely within a "safe zone," defined as a 3-dimensional region located a fixed distance from the inner cortical surface. Safe zones were calculated based on computed tomography-generated models of the right scaphoid from 10 healthy subjects. Two methods for screw axis calculation were compared: (1) maximum screw length (MSL) within the safe zone and (2) a cylinder best-fit (CYL) to the safe zone. The volar approach was defined as percutaneous screw placement through the scaphoid tubercle without violation of the trapezium. Resultant screw axes were compared between the 2 methods for volar accessibility, screw length, and location of the screw axis.

RESULTS:

The MSL axes were completely accessible without violating the trapezium in all but 2 subjects. The average MSL axes were 11% longer than the CYL axes and passed significantly closer to the scaphoid tubercle than did the CYL axes (1.8 mm vs 6.4 mm). The MSL axes passed significantly farther (1.6 mm) from the bone centroid than did the CYL axes (0.4 mm). All 10 MSL axes were located in the central one-third of the proximal pole.

CONCLUSIONS:

Without violation of the trapezium, MSL axis can be attained via the volar percutaneous approach to the scaphoid. Using this approach, the ideal starting point for maximal screw length was located 1.7 mm dorsal and 0.2 mm radial to the apex of the scaphoid tubercle.

PMID:
19345870
DOI:
10.1016/j.jhsa.2009.01.011
[Indexed for MEDLINE]

Supplemental Content

Full text links

Icon for Elsevier Science
Loading ...
Support Center