Format

Send to

Choose Destination
Nat Nanotechnol. 2007 Feb;2(2):114-20. doi: 10.1038/nnano.2006.208. Epub 2007 Jan 28.

Ultra-sensitive NEMS-based cantilevers for sensing, scanned probe and very high-frequency applications.

Author information

1
Kavli Nanoscience Institute, California Institute of Technology, MS 114-36, Pasadena, California 91125, USA.

Abstract

Scanning probe microscopies (SPM) and cantilever-based sensors generally use low-frequency mechanical devices of microscale dimensions or larger. Almost universally, off-chip methods are used to sense displacement in these devices, but this approach is not suitable for nanoscale devices. Nanoscale mechanical sensors offer a greatly enhanced performance that is unattainable with microscale devices. Here we describe the fabrication and operation of self-sensing nanocantilevers with fundamental mechanical resonances up to very high frequencies (VHF). These devices use integrated electronic displacement transducers based on piezoresistive thin metal films, permitting straightforward and optimal nanodevice readout. This non-optical transduction enables applications requiring previously inaccessible sensitivity and bandwidth, such as fast SPM and VHF force sensing. Detection of 127 MHz cantilever vibrations is demonstrated with a thermomechanical-noise-limited displacement sensitivity of 39 fm Hz(-1/2). Our smallest devices, with dimensions approaching the mean free path at atmospheric pressure, maintain high resonance quality factors in ambient conditions. This enables chemisorption measurements in air at room temperature, with unprecedented mass resolution less than 1 attogram (10(-18) g).

Comment in

PMID:
18654230
DOI:
10.1038/nnano.2006.208
[Indexed for MEDLINE]

Supplemental Content

Loading ...
Support Center