Send to

Choose Destination
See comment in PubMed Commons below
Anal Chim Acta. 2007 Jul 2;594(2):226-33. Epub 2007 May 26.

Simultaneous determination of antioxidants, preservatives and sweetener additives in food and cosmetics by flow injection analysis coupled to a monolithic column.

Author information

Department of Analytical Chemistry, Faculty of Sciences, Campus Fuentenueva, University of Granada, Granada 18071, Spain.


Today it is common to find samples with various additives from several families. This is the case of sweeteners, preservatives and antioxidants. We have selected a set of additives broadly used in foods and cosmetics with an ample variety of polarities, namely: aspartame (AS), acesulfame (AK)/saccharin (SA), methylparaben (MP), ethylparaben (EP), propylparaben (PP), butylparaben (BP), propylgallate (PG) and butylhydroxyanisole (BA). The monolithic column used as separative system is a 5 mm commercial precolumn of silica C18 coupled to a flow injection manifold working with a peristaltic pump. The mixture was separated in only 400 s with resolution factors greater than 1.1 in all cases. To achieve the separation in the FIA system we used two carriers: first, a mixture of ACN/water buffered with 10 mM pH 6.0 phosphate buffer and second, a methanol:water mixture to improve the carrier strength and speed up the more apolar analytes at 3.5 mL min(-1). Detection is accomplished by means of a diode array spectrometer at the respective wavelength of each compound. The comparison of the analytical parameters obtained for this procedure with a standard HPLC method validates our new method, obtaining a method that is quick, with high repeatability and reproducibility and with good resolution between analytes. We have successfully applied the method to real food and cosmetics samples.


LinkOut - more resources

Full Text Sources

Other Literature Sources

PubMed Commons home

PubMed Commons

How to join PubMed Commons

    Supplemental Content

    Full text links

    Icon for Elsevier Science
    Loading ...
    Support Center