Format

Send to

Choose Destination

Characterization of radiant emitters used in food processing.

Author information

1
Wyeth Pharmaceuticals, Sanford, NC, USA.

Abstract

Radiant emissions from short, medium, and long wavelength thermal radiant emitter systems typically used for food processing applications were quantified. Measurements included heat flux intensity, emitter surface temperature, and spectral wavelength distribution. Heat flux measurements were found highly dependent on the incident angle and the distance from the emitter facing. The maximum flux measured was 5.4 W/cm2. Emitter surface temperature measurements showed that short wavelength radiant systems had the highest surface temperature and greatest thermal efficiency. The emitter spectral distributions showed that radiant emitter systems had large amounts of far infrared energy emission greater than 3 microm when compared to theoretical blackbody curves. The longer wavelength energy would likely cause increased surface heating for most high moisture content food materials.

PMID:
15323107
[Indexed for MEDLINE]

Supplemental Content

Loading ...
Support Center