Format

Send to

Choose Destination
Clin Oral Implants Res. 2003 Oct;14(5):593-600.

The anchorage of Brånemark and ITI implants of different lengths. I. An experimental study in the canine mandible.

Author information

1
Department of Stomatology and Oral Surgery, School of Dental Medicine, University of Geneva, Switzerland. jean.pierre.bernard@medecine.unige.ch

Abstract

The anchorage of machined Brånemark and ITI TPS-coated implants of various lengths was investigated in an animal model. Brånemark fixtures 7 and 10 mm long and ITI implants 6 and 10 mm long were inserted in the mandible of dogs and were reverse-torqued after 3 months of healing. The failing mode was different for the two implant systems. For the ITI implants, loosening coincided with the peak reverse-torque values. For the Brånemark fixtures, two reverse-torque values were identified and recorded, a 'start to rotate' and a peak value. The 'start to rotate' values for the 7 and 10 mm Brånemark fixtures were 36.67 and 38.57 Ncm, respectively, the peak values were 61.88 and 69.13 Ncm. The increase in implant length from 7 to 10 mm did not significantly improve the anchorage. The mean reverse-torque values for the 6- and 10-mm ITI implants were 104.66 and 192.25 Ncm, respectively; the difference was statistically significant. The mean removal torque of the 6-mm ITI implant was higher than the 7- and 10-mm Brånemark implants. It is suggested that the distinct anchorage magnitude and the distinct loosening patterns registered for both implant systems might be related to the various surface states. The latter might account for the different failure tendencies mentioned in the literature for short Brånemark and ITI implants.

[Indexed for MEDLINE]

Supplemental Content

Full text links

Icon for Wiley
Loading ...
Support Center