Format

Send to

Choose Destination
See comment in PubMed Commons below
Appl Opt. 2002 Sep 1;41(25):5391-7.

Simultaneous measurement of current and voltage by use of one bismuth germanate crystal.

Author information

1
Department of Electronic Engineering, Faculty of Engineering, Gunma University, Kiryu, Japan. csli@el.gunma-u.ac.jp

Abstract

An optical fiber sensor is presented that allows current and voltage to be measured simultaneously by use of only one block of bismuth germanate crystal. The polarized light from the sensing crystal is split into two light beams: One beam is utilized for current measurement based on the Faraday effect, and the other one is utilized for voltage measurement based on the Pockels effect. Compared with the existing optical sensors that can measure current and voltage simultaneously, this sensor is simple and inexpensive and allows measurement of electric power. The simultaneous measurements of ac electric current from 0.05 to 10 A, voltage from 1 to 235 V, and power from 2 to 1000 W have been achieved with good linear-response characteristics. The input characteristics and measurement uncertainties that are due to the nonlinear error of the sensing system are also discussed.

PMID:
12211569
PubMed Commons home

PubMed Commons

0 comments
How to join PubMed Commons

    Supplemental Content

    Full text links

    Icon for Optical Society of America
    Loading ...
    Support Center