Method for determination of methyl tert-butyl ether in gasoline by gas chromatography

J Chromatogr A. 2001 Mar 2;910(2):377-83. doi: 10.1016/s0021-9673(00)01220-6.

Abstract

A simple method for the determination of methyl tert-butyl ether (MTBE) in gasoline has been developed. The separation of MTBE from other analytes was controlled by the use of gas chromatography-mass spectrometry in the full scan mode using the characteristic primary, secondary and tertiary ions m/z 73, 57 and 43. The sample mass spectrum did not show any superimposition of other analytes. The separation from the common gasoline component 2-methylpentane was sufficient for reliable quantitation. An application of the developed conditions using gas chromatography with flame ionization detection was performed by the analysis of regular, euro super, super premium unleaded and 'Optimax' gasoline from petrol stations in the area of Frankfurt/Main, Germany. Regular unleaded gasoline shows an average MTBE content of 0.4% (w/w), whereas the MTBE content in euro super gasoline varies between 0.4 and 4.2% (w/w). The blending of MTBE to super premium has increased from 8.2% (w/w) in 1998 to 9.8% (w/w) on average in 1999. The recently introduced gasoline 'Optimax' shows an average MTBE content of 11.9% (w/w). The presented method might also be used for the analysis of other ethers, such as ethyl tert-butyl ether, which requires the use of another internal standard.

MeSH terms

  • Gas Chromatography-Mass Spectrometry / methods*
  • Gasoline / analysis*
  • Methyl Ethers / analysis*
  • Reference Standards

Substances

  • Gasoline
  • Methyl Ethers
  • methyl tert-butyl ether