A 6-mm resolution, 30-tissue anatomy-based model of the human body is used to calculate specific absorption rate (SAR) and the induced current density distributions for radiofrequency and switched gradient magnetic fields used for MRI, respectively. For SAR distributions, the finite-difference time-domain (FDTD) method is used including modeling of 16-conductor birdcage coils and outer shields of dimensions that are typical of body and head coils and a new high-frequency head coil proposed for the 300-400 MHz band. SARs at 64, 128, and 170 MHz have been found to increase with frequency (f) as f(k) where k is on the order of 1.1-1.2. The tables of the calculated maximum 1 kg and 100 g SAR may be used to calculate the maximum RF currents and/or magnetic fields that may be used in order not to exceed the safety guidelines. Because of the low frequencies associated with switched gradient magnetic fields, a quasi-static impedance method is used for calculation of induced current densities that are compared with the safety guidelines.