U.S. flag

An official website of the United States government

Display Settings:

Format
Items per page
Sort by

Send to:

Choose Destination
Try this search in PMC Beta Search ➔

PMC Full-Text Search Results

Items: 1 to 20 of 330

1.
Additive Manufacturing for Repair: Continual Construction Through Bio-Based Materials
Mette Ramsgaard Thomsen, Paul Nicholas, Ruxandra-Stefania Chiujdea, Stine Dalager Nielsen, Konrad Sonne, Carl Eppinger
3D Print Addit Manuf. 2025 Apr; 12(2): 112–121. Published online 2025 Apr 14. doi: 10.1089/3dp.2023.0344
PMCID:
PMC12038328
ArticlePDF–3.6M
2.
Simulation of Binder Jetting and Analysis of Magnesium Alloy Bonding Mechanism
Qiang Yang, Mei Li, Ze Zhao, Ximeng Liao, Junchao Li
3D Print Addit Manuf. April 2024; 11(2): e751–e763. Published online 2024 Apr 16. doi: 10.1089/3dp.2022.0252
PMCID:
PMC11058416
ArticlePDF–1.2M
3.
Three-Dimensional Printable Magnetic Microfibers: Development and Characterization for Four-Dimensional Printing
Yanwen Han, Qing Lu, Jing Xie, Ki-Young Song, Dun Luo
3D Print Addit Manuf. April 2024; 11(2): e638–e654. Published online 2024 Apr 16. doi: 10.1089/3dp.2022.0103
PMCID:
PMC11057696
ArticlePDF–1.2M
4.
Direct Fabrication of Microcantilever Structures with High Shape Accuracy Using Projection-Based Stereolithography
Zhongwei Yu, Xinghong Deng, Jing Qiao, Dekai Zhou, Longqiu Li
3D Print Addit Manuf. April 2024; 11(2): e688–e697. Published online 2024 Apr 16. doi: 10.1089/3dp.2022.0236
PMCID:
PMC11057694
ArticlePDF–729K
5.
Mechanical Properties and Pore Structure of Multiwalled Carbon Nanotube-Reinforced Reactive Powder Concrete for Three-Dimensional Printing Manufactured by Material Extrusion
Deyuan Kan, Guifeng Liu, Shuang Cindy Cao, Zhengfa Chen, Qifeng Lyu
3D Print Addit Manuf. April 2024; 11(2): e675–e687. Published online 2024 Apr 16. doi: 10.1089/3dp.2022.0243
PMCID:
PMC11057692
ArticlePDF–966K
6.
Rapid Continuous 3D Printing via Orthogonal Dual-Color Photoinitiation and Photoinhibition
Min Hu, Haobo Cheng, Yunpeng Feng
3D Print Addit Manuf. April 2024; 11(2): 476–484. Published online 2024 Apr 16. doi: 10.1089/3dp.2022.0278
PMCID:
PMC11057690
ArticlePDF–533K
7.
Synthesis and Investigation of Mechanical Properties of the Acrylonitrile Butadiene Styrene Fiber Composites Using Fused Deposition Modeling
Ali Zahid, Muhammad Tuoqeer Anwar, Arslan Ahmed, Yasir Raza, Ghulam Abbas Gohar, Muhammad Jamshaid
3D Print Addit Manuf. April 2024; 11(2): e764–e772. Published online 2024 Apr 16. doi: 10.1089/3dp.2022.0199
PMCID:
PMC11057687
ArticlePDF–697K
8.
Development of Fused Deposition Modeling of Multiple Materials (FD3M) Through Dynamic Coaxial Extrusion
Robert G. Lahaie, Christopher J. Hansen, David O. Kazmer
3D Print Addit Manuf. April 2024; 11(2): 485–495. Published online 2024 Apr 16. doi: 10.1089/3dp.2022.0197
PMCID:
PMC11057573
ArticlePDF–682K
9.
The Influence of Fused Deposition Modeling Parameters on the Properties of PA6/PA66 Composite Specimens by the Taguchi Method and Analysis of Variance
Zhongbei Li, Youcai Liu, Zihai Liang, Yaochi Liu
3D Print Addit Manuf. April 2024; 11(2): e773–e786. Published online 2024 Apr 16. doi: 10.1089/3dp.2022.0306
PMCID:
PMC11057551
ArticlePDF–940K
10.
Corrosion Performance of Wire Arc Additive Manufacturing of Stainless Steel: A Brief Critical Assessment
Babatunde Olamide Omiyale, Ikeoluwa Ireoluwa Ogedengbe, Temitope Olumide Olugbade, Peter Kayode Farayibi
3D Print Addit Manuf. April 2024; 11(2): e572–e585. Published online 2024 Apr 16. doi: 10.1089/3dp.2022.0253
PMCID:
PMC11057549
ArticlePDF–569K
11.
Carbon-Based Piezoresistive Polymer Nanocomposites by Extrusion Additive Manufacturing: Process, Material Design, and Current Progress
James D. Banks, Anahita Emami
3D Print Addit Manuf. April 2024; 11(2): e548–e571. Published online 2024 Apr 16. doi: 10.1089/3dp.2022.0153
PMCID:
PMC11057547
ArticlePDF–1009K
12.
In Situ Reactive Printing of Aluminum Matrix Composite with Ultra-High Volume Fraction Reinforcement
Chenxi Tian, Atieh Moridi
3D Print Addit Manuf. April 2024; 11(2): e709–e717. Published online 2024 Apr 16. doi: 10.1089/3dp.2022.0152
PMCID:
PMC11057544
ArticlePDF–942K
13.
Investigating the Mechanical Properties of Polymer Samples from Different Additive Manufacturing Processes Using Ultrasonic Phase Spectroscopy
Philipp Eyer, Sarah Enzler, Anna Trauth, Kay André Weidenmann
3D Print Addit Manuf. April 2024; 11(2): e666–e674. Published online 2024 Apr 16. doi: 10.1089/3dp.2022.0148
PMCID:
PMC11057542
ArticlePDF–359K
14.
A Novel Cryogenic Approach to 3D Printing Cytocompatible, Conductive, Hydrogel-Based Inks
Aida Shoushtari Zadeh Naseri, Cormac Fay, Andrew Nattestad, Gregory Ryder, Sepidar Sayyar, Zhilian Yue, Xiao Liu, David L. Officer, Gordon G. Wallace
3D Print Addit Manuf. April 2024; 11(2): 447–459. Published online 2024 Apr 16. doi: 10.1089/3dp.2022.0169
PMCID:
PMC11057540
ArticlePDF–1.8M
15.
Effects of Immersion on Knowledge Gain and Cognitive Load in Additive Manufacturing Process Education
Jayant Mathur, Scarlett R. Miller, Timothy W. Simpson, Nicholas A. Meisel
3D Print Addit Manuf. April 2024; 11(2): e787–e800. Published online 2024 Apr 16. doi: 10.1089/3dp.2022.0180
PMCID:
PMC11057536
ArticlePDF–1.1M
16.
Rapid Fabrication of Silica Microlens Arrays via Glass 3D Printing
Chunxin Liu, Taras Oriekhov, Cherrie Lee, Clarissa M. Harvey, Michael Fokine
3D Print Addit Manuf. April 2024; 11(2): 460–466. Published online 2024 Apr 16. doi: 10.1089/3dp.2022.0112
PMCID:
PMC11057534
ArticlePDF–733K
17.
Efficient Fabrication of Quartz Glass Using Laser Coaxial Powder-Fed Additive Manufacturing Approach
Ming Lang, Xiao-Li Ruan, Chong He, Zhi-Qiang Chen, Tao Xu, Hai-Bin Zhang, Yun-Tao Cheng
3D Print Addit Manuf. April 2024; 11(2): e655–e665. Published online 2024 Apr 16. doi: 10.1089/3dp.2022.0137
PMCID:
PMC11057532
ArticlePDF–859K
18.
Rheological Analysis of 3D Printed Elements of Acrylonitrile Butadiene and Styrene Material Using Multiparameter Ideal Body Models
Wiktor Szot
3D Print Addit Manuf. April 2024; 11(2): e860–e875. Published online 2024 Apr 16. doi: 10.1089/3dp.2022.0298
PMCID:
PMC11057530
ArticlePDF–903K
19.
Three-Dimensional Printing of Ultrasoft Silicone with a Functional Stiffness Gradient
Clayton A. Young, MeiLi O'Bannon, Scott L. Thomson
3D Print Addit Manuf. April 2024; 11(2): 435–445. Published online 2024 Apr 16. doi: 10.1089/3dp.2022.0218
PMCID:
PMC11057526
ArticlePDF–1.3M
20.
Laser-Based Additive Manufacturing and Characterization of an Open-Porous Ni-Based Metallic Glass Lattice Structure (Ni60Nb20Ta20)
Kerstin Dittmann, Steffen Czink, Stefan Dietrich, Anna Trauth, Kay André Weidenmann
3D Print Addit Manuf. April 2024; 11(2): e537–e547. Published online 2024 Apr 16. doi: 10.1089/3dp.2022.0118
PMCID:
PMC11057524
ArticlePDF–1.0M

Display Settings:

Format
Items per page
Sort by

Send to:

Choose Destination

Supplemental Content

Filter your results:

Find related data

Search details

See more...

Recent activity

Clear Turn Off Turn On

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

See more...