This book is distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) ( http://creativecommons.org/licenses/by-nc-nd/4.0/ ), which permits others to distribute the work, provided that the article is not altered or used commercially. You are not required to obtain permission to distribute this article, provided that you credit the author and journal.
NCBI Bookshelf. A service of the National Library of Medicine, National Institutes of Health.
StatPearls [Internet]. Treasure Island (FL): StatPearls Publishing; 2024 Jan-.
StatPearls [Internet].
Show detailsContinuing Education Activity
Polymer fume fever is an underrecognized flu-like illness associated with inhaling the thermal degradation byproducts of fluorocarbons. Overheating polytetrafluoroethylene (PTFE) coated nonstick (Teflon®) cookware represents the most common avenue of exposure. Occupational exposures related to improper ventilation or poor hand hygiene after handling the raw material also represent a persistent risk. Patients with polymer fume fever classically present with fever, malaise, dyspnea, chest tightness, and a dry cough a few hours after exposure. Laboratory evaluation and chest radiographs are generally unremarkable, although leukocytosis and pulmonary edema may be noted in more significant exposures. Recovery is usually complete within a few days. Death and permanent disability are exceedingly rare. This activity reviews the evaluation of polymer fume fever and highlights the importance of the interprofessional team when treating and ultimately preventing this condition.
Objectives:
- Correlate the exposure to fluoropolymer degradation products with related health conditions in the general population.
- Differentiate the signs, symptoms, and clinical course of polymer fume fever from other respiratory illnesses.
- Utilize best practices when counseling patients about reducing the incidence of polymer fume fever in the home and occupational settings.
- Apply effective interprofessional team strategies to reduce exposure to fluoropolymer degradation products and improve outcomes for patients with polymer fume fever.
Introduction
Polytetrafluoroethylene (PTFE) is a synthetic polymer of tetrafluoroethylene gas (F2C=CF2). PTFE was serendipitously discovered in 1938 by researchers at DuPont, who found that tetrafluoroethylene gas had spontaneously polymerized within uncoated pressurized metallic canisters. Subsequent research led to the description of a novel compound that would ultimately transform the world.
PTFE is a nonreactive, hydrophobic, low-friction material at room temperature. These properties have been applied broadly across industries, from coating pans to create a nonstick surface as with Teflon®, creating breathable and highly water-resistant fabrics found in outdoor clothing as with Gore-Tex®, to medical devices including stent coatings, bypass grafts, and hernia meshes, among others.[1]
Due to its inertness and relative thermal stability, the acute health toxicity of fully polymerized PTFE was initially perceived to be low. However, this assertion was challenged in 1951 with the first reported case series of polymer fume fever due to occupational exposure.[2] Subsequent epidemics over the years further supported the findings of adverse health effects associated with overheating fluorocarbon polymers, including PTFE.[3]
Etiology
Polymer fume fever is precipitated by inhaling the thermal decomposition products of fluoropolymers.[2] While PTFE is the most well-recognized cause of polymer fume fever, likely due to its numerous industrial applications, other fluoropolymers, including fluorinated polyethylenepropylene, have also been implicated in this disease process.[4] Similar illnesses have been reported due to the overheating of chloropolymers; in those reports, the specific etiologic compound was not identified.[5]
Although PTFE releases fumes at temperatures as low as 260 °C (500 °F), symptoms in humans generally do not begin until the material is heated to 350 °C (662 °F). Pyrolysis commences at 400 °C (752 °F).[6]
Perfluoroisobutylene, fluoroethylene, hexafluoroethane, octafluorocyclobutane, and hexafluoropropylene have all been identified as specific pyrolysis or degradation products and are likely the primary xenobiotics that precipitate the clinical effects of polymer fume fever.[7] Pyrolysis of fluoropolymers at even higher temperatures, over 500 °C, releases hydrogen fluoride and carbonyl fluoride, the fluoride analog of phosgene.
Epidemiology
The epidemiology of polymer fume fever is incompletely characterized, and the incidence is likely underreported.
Polymer fume fever was first reported in the occupational setting among individuals who processed raw PTFE or PTFE-coated products.[2][3] After multiple incidents of flu-like outbreaks among workers, epidemiologists determined these symptoms were most often the result of poor industrial hygiene; individuals who worked with raw PTFE and then touched their cigarettes without adequate hand hygiene were most likely to demonstrate symptoms. Subsequent inhalation of tobacco smoke provided sufficient PTFE exposure to trigger an episode of polymer fume fever, which can be precipitated by exposure to a particle the equivalent of 1 mm in size.[8] Less commonly, breathing the air where coated material has been burned or fused can cause exposure sufficient to precipitate symptoms.[3]
Most contemporary PTFE exposures occur at home and are the result of inhaling vapors emitted by overheated PTFE-coated pans. The risk of vapor inhalation is increased if the heated cookware is dry, as in circumstances where oil was not added or all added water evaporated.[9] Exposure to particulate PTFE after cooking oils have been applied to the PTFE coating seems less common as the relative smoke points of commonly used cooking oils are all lower than the temperature at which overheated PTFE precipitates symptoms in humans.
More unusual routes of particulate exposure have included inhaling pyrolyzed hair spray formulated with fluorocarbons and contamination of smokable materials after using mold-release spray and dry lubricants.[10][11][12]
Between 2006 and 2012, a yearly average of 9 cases of polymer fume fever were reported to regional poison control centers in the United States. This likely demonstrates underreporting. In a retrospective study of fabrication plant workers, only 10% of workers with symptoms consistent with polymer fume fever sought medical assistance.[13] It can also be surmised that many patients who present to a healthcare facility may not report exposure to PTFE or fluorocarbon-coated materials. Healthcare providers may not inquire into such exposures due to a lack of knowledge of the association between inhalation of fumes and clinical symptoms. And finally, poison center data, in general, suffers from underreporting bias. Even if the connection to fluoropolymer exposure is made, many practitioners do not necessarily need poison control center support or wish to spend the time to report the link.[14]
Growing evidence also suggests that chronic occupational exposure to unheated PTFE aerosols may place workers at risk for granulomatous lung disease.[15][16]
Pathophysiology
Studies investigating the pathophysiologic mechanisms underlying polymer fume fever are sparse. It is suspected that fluorocarbon degradation products activate neutrophils, leading to a proinflammatory cytokine cascade akin to the processes underlying metal fume fever.[7] When carbonyl fluoride is produced, hydrofluoric acid is generated when the former hydrolyzes after interacting with water. This likely potentiates the inflammatory cascade by precipitating further direct pulmonary injury.
Toxicokinetics
The toxicokinetics and toxicodynamics of the degradation and pyrolytic products that precipitate polymer fume fever are poorly described.
History and Physical
Polymer fume fever generally presents as a mild flu-like illness typified by fever, myalgias, dyspnea, chest tightness, nonproductive cough, and headache.[3]
Symptoms generally start within 12 hours after exposure, but the presentation may be delayed up to 24 hours.[7] Although pyrexia is occasionally present, overt hypoxia is uncommon. Blood pressure and heart rate are usually normal.
The physical examination is usually unremarkable except for occasional abnormal pulmonary findings, including nonproductive cough and bronchospasm. Crackles or rales may be present in instances where the patient is experiencing noncardiogenic pulmonary edema induced by the fluoropolymer degradation products.[17]
A known exposure to fluorocarbon degradation products is required to diagnose polymer fume fever. These precipitating exposures most commonly include accidentally overheating nonstick cookware or smoking after occupational work with granular PTFE particles or substrate. Although occupational exposure is less common with stricter controls, inquiring if the patient failed to wash their hands before smoking may be illuminating.[2][3]
Evaluation
Although the diagnosis of polymer fume fever is clinical, obtaining a complete blood count with differential and chest radiography is reasonable. Leukocytosis with a left shift may be present. Chest radiography findings are often normal but, after significant exposures, may reveal bilateral infiltrates consistent with pulmonary edema.[18]
Pulmonary function tests or spirometry, including FEV1 and FEV1/FVC, have limited utility when diagnosing or treating polymer fume fever. While many patients with polymer fume fever have normal pulmonary function, some exhibit a mild obstructive pattern exacerbated from their baseline. However, it is important to note that an underlying smoking history frequently confounds these results.[3][7]
Treatment / Management
The typical course of polymer fume fever is mild and self-limited. Treatment should be directed toward the presenting symptoms. Fever can be effectively managed with antipyretics such as acetaminophen or nonsteroidal anti-inflammatory drugs. Bronchospasm is effectively treated with inhaled beta-agonists or glucocorticoids. Hypoxic patients should be placed on supplemental oxygen.
In cases of acute respiratory distress syndrome (ARDS) or severe non-cardiogenic pulmonary edema, bilevel-positive airway pressure (BiPAP) or endotracheal intubation with ventilator support may be required.[18]
Decisions surrounding inpatient admission should be tailored to the timing and severity of the clinical presentation and exposure. It is reasonable to observe patients with significant and prolonged exposures, such as overheated PTFE-coated cookware, as there may be a latency of many hours until symptoms peak.
Differential Diagnosis
A clinical history specifically identifying an appropriate fluoropolymer exposure, as well as the exclusion of other potential causes, is required to establish a diagnosis of polymer fume fever.
The differential diagnosis of polymer fume fever comprises noninfectious and infectious etiologies. Noninfectious etiologies of the clinical constellation of symptoms seen in polymer fume fever include metal fume fever, trimellitic flu, farmer's lung, and many other causes of hypersensitivity pneumonitis.[7][19][20]
Infectious diagnoses that may mimic polymer fume fever include typical and atypical bacterial respiratory illnesses and viral infections with influenza, Sars-cov-2, parainfluenza, or respiratory syncytial virus. However, polymer fume fever does not usually present with the typical viral upper respiratory symptoms of congestion, rhinorrhea, and otalgia. Additionally, the concomitant presence of diarrhea, in particular, should suggest another etiology.[7]
Toxicity and Adverse Effect Management
There currently does not appear to be any longstanding harm after a single episode of polymer fume fever or persistent toxicity from a single exposure to fluorocarbon polymer degradation products. Nevertheless, the lack of evidence in this realm should not be assumed to indicate evidence of a lack of harm. There is a burgeoning field of research exploring the long-term effects of fluorocarbon toxicology on human health, and further insights in the coming years should be expected.
Prognosis
Polymer fume fever typically follows a benign course, and most affected patients make a full and brisk recovery. Symptoms generally peak within 24 hours of exposure and gradually improve over 24 to 48 hours.[7] Even when patients present with more significant symptoms, such as pulmonary edema, a full recovery is expected over the following 5 to 10 days.[18] Death from polymer fume fever is exceedingly rare.[21] Unlike metal fume fever, tachyphylaxis is not described.
Complications
Most patients will make a complete recovery. Permanent impairment in lung function and physiology, such as pulmonary fibrosis, is rarely described and appears to be restricted to those with recurrent exposures.[7][22]
Deterrence and Patient Education
When an episode of polymer fume fever is attributed to overheated PTFE-coated cookware, the risks of cooking on unattended pans should be emphasized. Providers can also recommend cooking on materials such as enameled cast iron or stainless steel that do not pose a vapor hazard if accidentally overheated.
Industrial health hygienists should evaluate the workplace environment for episodes of polymer fume fever likely linked to an occupational setting. Even if the episode appears to be a straightforward instance of inadequate hand hygiene, further appraisal by trained occupational health personnel may lead to better exposure controls facility-wide. Such evaluation may also help determine if other workers have been symptomatic but hesitant to seek care. It is prudent for healthcare providers to emphasize that workers wear the proscribed personal protective equipment and engage in appropriate hand hygiene pending a formal workplace evaluation.
In the United States, workers have the right to a safe workplace. A worker may specifically request a Health Hazard Evaluation (HHE) by the National Institute of Occupational Health and Safety (NIOSH) or the Occupational Health and Safety Administration (OSHA). Under OSHA regulations, workers can file anonymously for an investigation.
Enhancing Healthcare Team Outcomes
Polymer fume fever is an underrecognized disease due to a lack of clinician awareness. Educating healthcare providers that overheating fluoropolymers, including PTFE, can lead to flu-like symptoms is the first step in improving patient outcomes.
Once the polymer fume fever is diagnosed, involving the regional poison control center can prove invaluable for patient care. Specialists in poison information and toxicology can provide recommendations tailored to the specific clinical presentation and help give the next steps in preventing subsequent toxicity. Such steps might include attention to cooking habits if the exposure was related to an overheated pan or encouraging attention to occupational hygiene in the setting of occupational exposures.
Additionally, and specifically in the United States, NIOSH may be contacted to conduct a health hazard evaluation of workplace safety. Involvement of the poison control center also allows for tracking of these cases and improves the opportunity for further research investigation into the evolving etiologies and outcomes of patients who experience polymer fume fever.
Review Questions
References
- 1.
- Roina Y, Auber F, Hocquet D, Herlem G. ePTFE-based biomedical devices: An overview of surgical efficiency. J Biomed Mater Res B Appl Biomater. 2022 Feb;110(2):302-320. [PubMed: 34520627]
- 2.
- HARRIS DK. Polymer-fume fever. Lancet. 1951 Dec 01;2(6692):1008-11. [PubMed: 14881537]
- 3.
- LEWIS CE, KERBY GR. AN EPIDEMIC OF POLYMER-FUME FEVER. JAMA. 1965 Feb 01;191:375-8. [PubMed: 14232438]
- 4.
- Sprout WL. Polymer-fume fever. J Occup Med. 1988 Apr;30(4):296, 300. [PubMed: 3379482]
- 5.
- Goldstein M, Weiss H, Wade K, Penek J, Andrews L, Brandt-Rauf P. An outbreak of fume fever in an electronics instrument testing laboratory. J Occup Med. 1987 Sep;29(9):746-9. [PubMed: 3681507]
- 6.
- Sajid M, Ilyas M. PTFE-coated non-stick cookware and toxicity concerns: a perspective. Environ Sci Pollut Res Int. 2017 Oct;24(30):23436-23440. [PubMed: 28913736]
- 7.
- Greenberg MI, Vearrier D. Metal fume fever and polymer fume fever. Clin Toxicol (Phila). 2015 May;53(4):195-203. [PubMed: 25706449]
- 8.
- Silver MJ, Young DK. Acute noncardiogenic pulmonary edema due to polymer fume fever. Cleve Clin J Med. 1993 Nov-Dec;60(6):479-82. [PubMed: 8287510]
- 9.
- Shimizu T, Hamada O, Sasaki A, Ikeda M. Polymer fume fever. BMJ Case Rep. 2012 Dec 10;2012 [PMC free article: PMC4544973] [PubMed: 23230259]
- 10.
- Delgado JH, Waksman JC. Polymer fume fever-like syndrome due to hairspray inhalation. Vet Hum Toxicol. 2004 Oct;46(5):266-7. [PubMed: 15487651]
- 11.
- Albrecht WN, Bryant CJ. Polymer-fume fever associated with smoking and use of a mold-release spray containing polytetrafluoroethylene. J Occup Med. 1987 Oct;29(10):817-9. [PubMed: 3681493]
- 12.
- Patel MM, Miller MA, Chomchai S. Polymer fume fever after use of a household product. Am J Emerg Med. 2006 Nov;24(7):880-1. [PubMed: 17098116]
- 13.
- Polakoff PL, Busch KA, Okawa MT. Urinary fluoride levels in polytetrafluoroethylene fabricators. Am Ind Hyg Assoc J. 1974 Feb;35(2):99-106. [PubMed: 4817124]
- 14.
- Blanc PD, Maizlish N, Hiatt P, Olson KR, Rempel D. Occupational illness and poison control centers. Referral patterns and service needs. West J Med. 1990 Feb;152(2):181-4. [PMC free article: PMC1002305] [PubMed: 2305574]
- 15.
- Lee N, Baek K, Park S, Hwang I, Chung I, Choi W, Jung H, Lee M, Yang S. Pneumoconiosis in a polytetrafluoroethylene (PTFE) spray worker: a case report with an occupational hygiene study. Ann Occup Environ Med. 2018;30:37. [PMC free article: PMC5987387] [PubMed: 29992029]
- 16.
- Aoki A, Saito A, Shima K, Kimura Y, Asakawa K, Ohashi R, Umezu H, Sakagami T, Moriyama H, Kikuchi T. Occupational Lung Disease Caused by Exposure to Polytetrafluoroethylene. Intern Med. 2022 Dec 15;61(24):3713-3717. [PMC free article: PMC9841090] [PubMed: 35598992]
- 17.
- Fiero M, Huang S, Bell ML. Statistical analysis and handling of missing data in cluster randomised trials: protocol for a systematic review. BMJ Open. 2015 May 13;5(5):e007378. [PMC free article: PMC4431058] [PubMed: 25971707]
- 18.
- Hamaya R, Ono Y, Chida Y, Inokuchi R, Kikuchi K, Tameda T, Tase C, Shinohara K. Polytetrafluoroethylene fume-induced pulmonary edema: a case report and review of the literature. J Med Case Rep. 2015 May 14;9:111. [PMC free article: PMC4436768] [PubMed: 25971706]
- 19.
- Venables KM. Low molecular weight chemicals, hypersensitivity, and direct toxicity: the acid anhydrides. Br J Ind Med. 1989 Apr;46(4):222-32. [PMC free article: PMC1009761] [PubMed: 2653411]
- 20.
- Zergham AS, Heller D. StatPearls [Internet]. StatPearls Publishing; Treasure Island (FL): Feb 5, 2023. Farmer's Lung. [PubMed: 32491512]
- 21.
- Lee CH, Guo YL, Tsai PJ, Chang HY, Chen CR, Chen CW, Hsiue TR. Fatal acute pulmonary oedema after inhalation of fumes from polytetrafluoroethylene (PTFE). Eur Respir J. 1997 Jun;10(6):1408-11. [PubMed: 9192951]
- 22.
- Williams N, Atkinson W, Patchefsky AS. Polymer-fume fever: not so benign. J Occup Med. 1974 Aug;16(8):519-22. [PubMed: 4843400]
Disclosure: Matthew Correia declares no relevant financial relationships with ineligible companies.
Disclosure: B. Zane Horowitz declares no relevant financial relationships with ineligible companies.
- Continuing Education Activity
- Introduction
- Etiology
- Epidemiology
- Pathophysiology
- Toxicokinetics
- History and Physical
- Evaluation
- Treatment / Management
- Differential Diagnosis
- Toxicity and Adverse Effect Management
- Prognosis
- Complications
- Deterrence and Patient Education
- Enhancing Healthcare Team Outcomes
- Review Questions
- References
- Review Metal fume fever and polymer fume fever.[Clin Toxicol (Phila). 2015]Review Metal fume fever and polymer fume fever.Greenberg MI, Vearrier D. Clin Toxicol (Phila). 2015 May; 53(4):195-203. Epub 2015 Feb 23.
- Pulmonary effects induced by ultrafine PTFE particles.[Toxicol Appl Pharmacol. 2000]Pulmonary effects induced by ultrafine PTFE particles.Johnston CJ, Finkelstein JN, Mercer P, Corson N, Gelein R, Oberdörster G. Toxicol Appl Pharmacol. 2000 Nov 1; 168(3):208-15.
- Poly(tetrafluoroethylene) separation capillaries for capillary electrophoresis. Properties and applications.[J Chromatogr A. 2004]Poly(tetrafluoroethylene) separation capillaries for capillary electrophoresis. Properties and applications.Macka M, Yang WC, Zakaria P, Shitangkoon A, Hilder EF, Andersson P, Nesterenko P, Haddad PR. J Chromatogr A. 2004 Jun 11; 1039(1-2):193-9.
- A case of polytetrafluoroethylene poisoning in cockatiels accompanied by polymer fume fever in the owner.[Vet Rec. 1975]A case of polytetrafluoroethylene poisoning in cockatiels accompanied by polymer fume fever in the owner.Blandford TB, Seamon PJ, Hughes R, Pattison M, Wilderspin MP. Vet Rec. 1975 Feb 22; 96(8):175-8.
- Review PTFE-coated non-stick cookware and toxicity concerns: a perspective.[Environ Sci Pollut Res Int. 2017]Review PTFE-coated non-stick cookware and toxicity concerns: a perspective.Sajid M, Ilyas M. Environ Sci Pollut Res Int. 2017 Oct; 24(30):23436-23440. Epub 2017 Sep 14.
- Polymer Fume Fever - StatPearlsPolymer Fume Fever - StatPearls
Your browsing activity is empty.
Activity recording is turned off.
See more...