Measurement of AC magnetic field distribution using magnetic resonance imaging

IEEE Trans Med Imaging. 1997 Oct;16(5):617-22. doi: 10.1109/42.640752.

Abstract

Electric currents are applied to body in numerous applications in medicine such as electrical impedance tomography, cardiac defibrillation, electrocautery, and physiotherapy. If the magnetic field within a region is measured, the currents generating these fields can be calculated using the curl operator. In this study, magnetic fields generated within a phantom by currents passing through an external wire is measured using a magnetic resonance imaging (MRI) system. A pulse sequence that is originally designed for mapping static magnetic field inhomogeneity is adapted. AC current in the form of a burst sine wave is applied synchronously with the pulse sequence. The frequency of the applied current is in the audio range with an amplitude of 175-mA rms. It is shown that each voxel value of sequential images obtained by the proposed pulse sequence is modulated similar to a single tone broadband frequency modulated (FM) waveform with the ac magnetic field strength determining the modulation index. An algorithm is developed to calculate the ac magnetic field intensity at each voxel using the frequency spectrum of the voxel signal. Experimental results show that the proposed algorithm can be used to calculate ac magnetic field distribution within a conducting sample that is placed in an MRI system.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Algorithms
  • Computer Simulation
  • Electric Countershock
  • Electric Impedance
  • Electric Stimulation Therapy
  • Electricity
  • Electrocoagulation
  • Electromagnetic Fields*
  • Feasibility Studies
  • Fourier Analysis
  • Humans
  • Image Processing, Computer-Assisted
  • Magnetic Resonance Imaging*
  • Models, Biological
  • Phantoms, Imaging
  • Physical Therapy Modalities
  • Sound
  • Time Factors
  • Tomography