Format

Send to

Choose Destination
See comment in PubMed Commons below
J Acoust Soc Am. 1996 Aug;100(2 Pt 1):945-55.

Distortion product otoacoustic emissions created through the interaction of spontaneous otoacoustic emissions and externally generated tones.

Author information

  • 1Department of Speech & Hearing Sciences, University of Arizona, Tucson 85721, USA.

Abstract

Spontaneous otoacoustic emissions (SOAEs) and external tones (XTs) were used as primaries f2 and f1, respectively (frequency of f2 > f1) to create 2f1--f2 distortion product otoacoustic emissions (DPOAEs). Amplitude and frequency of the SOAEs, XTs, and DPOAEs were recorded by placing a sensitive microphone in the ear canal and extracted using fast Fourier transform analysis. XTs were presented to ten ears at SOAE/f1 ratios between 1.08 and 1.22. XTs were incremented in 5-dB steps and ranged from levels equal to the initial SOAE amplitudes to levels at which the SOAEs and DPOAEs were suppressed into the noise floor. Results indicated that DPOAE amplitudes and SOAE suppression characteristics were idiosyncratic. Despite the variability, the following trends were noted: (1) at larger frequency ratios, DPOAE generation and SOAE suppression were associated with greater XT levels; (2) DPOAE growth functions were characterized by slopes less than 1 dB/dB, a maximum, rollover and disappearance into the noise floor with increasing XT levels; (3) maximum amplitude DPOAEs were observed at frequencies approximately one-half octave lower than the SOAE (f2); (4) the presence of DPOAEs was associated with SOAE suppression; (5) the most common SOAE frequency shift, in the presence of XT stimulation, was a shift to a higher frequency.

PMID:
8759948
[PubMed - indexed for MEDLINE]
PubMed Commons home

PubMed Commons

0 comments
How to join PubMed Commons

    Supplemental Content

    Loading ...
    Write to the Help Desk