Why make monofilament sutures out of polyvinylidene fluoride?

ASAIO J. 1994 Apr-Jun;40(2):145-56.

Abstract

In recent years some clinical reports have associated suture failures with polypropylene monofilaments. Therefore there is interest in developing an alternative suture material that is less thrombogenic than polyester and similar in handling characteristics but less prone to mechanical failure than polypropylene. To this end, Peters Laboratoire Pharmaceutique has developed a new monofilament suture material from polyvinylidene fluoride (PVDF), which has been subjected to a special treatment to modify its crystalline form and level of crystallinity. The purpose of this study was to evaluate its mechanical, chemical, and biologic properties and to compare its performance, in a peripheral vascular application, to that of a polypropylene control. A series of in vitro tests were performed to study the morphology, tensile properties, creep, surface chemistry, thermal characteristics, and resistance to iatrogenic trauma. In addition, an in vivo trial was undertaken in which vascular prostheses anastomosed with either PVDF or polypropylene sutures were implanted as a thoracoabdominal bypass for 6 months in the dog. Histologic and degradation analyses were performed on the explants. The results from the mechanical tests on 4-0, 5-0, and 6-0 PVDF and polypropylene sutures demonstrated that although both materials have similar breaking strengths, the PVDF has a higher extension at break, has less delayed extension when under tensile creep testing, and suffers less trauma than the polypropylene when compressed by a standard needle holder. While chemical analyses found evidence of surface oxidation on both types of sutures, thermal analysis confirmed that the level of crystallinity of the PVDF polymer is higher than that of the polypropylene control. During the pilot study in animals, PVDF sutures were found to have good handling and frictional characteristics that facilitated the tying of knots. Histologic analysis of the explants found no inflammatory cells in the tissue surrounding either the PVDF or polypropylene sutures, and scanning electron microscopic examination of the cleaned suture surfaces found no evidence of degradation during 6 months in vivo. Though preliminary in nature, these findings indicate that monofilament sutures made from PVDF provide an attractive alternative to those made from polypropylene for use in cardiovascular surgery. In addition to providing acceptable in vivo behavior and being easy to manipulate and more resistant to iatrogenic injury, PVDF materials can be sterilized by beta or gamma radiation and so can reduce dependence upon ethylene oxide and chlorofluorohydrocarbons.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Animals
  • Biocompatible Materials*
  • Calorimetry
  • Dogs
  • Materials Testing
  • Microscopy, Electron, Scanning
  • Pilot Projects
  • Polyvinyls* / chemistry
  • Prostheses and Implants
  • Spectrum Analysis
  • Surface Properties
  • Sutures*
  • Tensile Strength

Substances

  • Biocompatible Materials
  • Polyvinyls
  • polyvinylidene fluoride