Self-supported 3D reduced graphene oxide for solid-phase extraction: An efficient and low-cost sorbent for environmental contaminants in aqueous solution

A 3D reduced graphene oxide (3D-rGO), a self-supported, efficient, and low-cost sorbent, was synthesised and employed in a solid-phase extraction (SPE) cartridge. As a proof of concept, it was applied to remove diclofenac from aqueous solution. After applying statistical methods to systematically investigate key parameters for optimizing the 3D-rGO cartridge performance, it reached removal and elution efficiencies of 100 % and 90 %, respectively. This SPE cartridge presented advantages compared to traditional ones as the smaller amount of material into the cartridge (mass twenty times smaller), in addition to the ability of eliminating sorbent preconditioning, reducing the use of solvents, and making the process environmentally friendly with a faster operation. Also, it presented improved reproducibility after several cycles of reuse, and finally a lower cost of production unveiled by a cost-benefit analysis. Analysis with scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectrometry, Raman, and Fourier transform infrared spectroscopy in attenuated total reflectance mode suggested that the 3D framework morphology with a high content of carbon at the surface and some residual oxygen-containing groups are the protagonists in this performance. Therefore, 3D-rGO has the potential to be a highly efficient sorbent in analytical procedures using SPE for environmental contaminants in water and effluent samples.