Gate-Tunable Negative Differential Resistance Behaviors in a hBN-Encapsulated BP-MoS2 Heterojunction

ACS Appl Mater Interfaces. 2021 Jun 9;13(22):26161-26169. doi: 10.1021/acsami.1c03959. Epub 2021 May 25.

Abstract

Two-dimensional (2D) heterostructures show great potential in achieving negative differential resistance (NDR) effects by Esaki diodes and or resonant tunneling diodes. However, most of the reported Esaki diode-based NDR devices realized by bulk 2D films lack sufficient gate tunability, and the tuning of NDR behavior from appearing to vanishing remains elusive. Here, a gate-tunable NDR device is reported based on a vertically stacked black phosphorus (BP) and molybdenum disulfide (MoS2) thin 2D heterojunction. At room temperature, a rectifying ratio of ∼6 orders of magnitude from a reverse rectifying diode to a forward rectifying diode by gate modulation is obtained. Through analyzing the temperature-dependent electrical properties, the tunneling mechanism at a certain gate voltage range is revealed. Moreover, the switchable and continuously gate-tunable NDR behavior is realized with a maximum peak-to-valley ratio of 1.23 at 77 K, as shown in the IDS mappings by sweeping VDS under different VGS. In addition, a compact model for gate-tunable NDR behavior in 2D heterostructures is proposed. To our best knowledge, this is the first demonstration of NDR behavior in BP-MoS2 heterostructures. Consequently, this work sheds light on the gate-tunable NDR devices and reconfigurable logic devices for realizing ternary and reconfigurable logic systems.

Keywords: 2D heterojunction; Esaki diodes; black phosphorus; molybdenum disulfide; negative differential resistance.