Electrically tunable infrared filter based on the liquid crystal Fabry-Perot structure for spectral imaging detection

Appl Opt. 2014 Sep 1;53(25):5632-9. doi: 10.1364/AO.53.005632.

Abstract

An electrically tunable infrared (IR) filter based on the liquid crystal (LC) Fabry-Perot (FP) key structure, which works in the wavelength range from 5.5 to 12 μm, is designed and fabricated successfully. Both planar reflective mirrors with a very high reflectivity of ∼95%, which are shaped by depositing a layer of aluminum (Al) film over one side of a double-sided polished zinc selenide wafer, are coupled into a dual-mirror FP cavity. The LC materials are filled into the FP cavity with a thickness of ∼7.5 μm for constructing the LC-FP filter, which is a typical type of sandwich architecture. The top and bottom mirrors of the FP cavity are further coated by an alignment layer with a thickness of ∼100 nm over Al film. The formed alignment layer is rubbed strongly to shape relatively deep V-grooves to anchor LC molecules effectively. Common optical tests show some particular properties; for instance, the existing three transmission peaks in the measured wavelength range, the minimum full width at half-maximum being ∼120 nm, and the maximum adjustment extent of the imaging wavelength being ∼500 nm through applying the voltage driving signal with a root mean square (RMS) value ranging from 0 to ∼19.8 V. The experiment results are consistent with the simulation, according to our model setup. The spectral images obtained in the long-wavelength IR range, through the LC-FP device driven by the voltage signal with a different RMS value, demonstrates the prospect of the realization of smart spectral imaging and further integrating the LC-FP filter with IR focal plane arrays. The developed LC-FP filters show some advantages, such as electrically tunable imaging wavelength, very high structural and photoelectronic response stability, small size and low power consumption, and a very high filling factor of more than 95% compared with common MEMS-FP spectral imaging approaches.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Electromagnetic Fields
  • Equipment Design
  • Equipment Failure Analysis
  • Image Enhancement / instrumentation
  • Infrared Rays*
  • Interferometry / instrumentation*
  • Lenses*
  • Liquid Crystals / chemistry*
  • Liquid Crystals / radiation effects*
  • Refractometry / instrumentation*
  • Spectrophotometry, Infrared / instrumentation*