Send to:

Choose Destination
See comment in PubMed Commons below
Eur J Orthop Surg Traumatol. 2015 Feb;25(2):321-9. doi: 10.1007/s00590-014-1497-x. Epub 2014 Jun 27.

Influence of the volume of bone defect, bone grafting methods, and hook fixation on stress on the Kerboull-type plate and screw in total hip arthroplasty: three-dimensional finite element analysis.

Author information

  • 1Department of Orthopaedic Surgery, Faculty of Medicine, Oita University, Oita, 879-5593, Japan,


For total hip arthroplasty or revision surgery using acetabular reinforcement cross-plates, choosing between bulk and morselized bone grafts for filling acetabular defects is challenging. We used finite element model (FEM) analysis to clarify various stresses on the cross-plate based on bone defect size, bone graft type, and presence or absence of hook fixation to the bone. We constructed 12-pattern FEMs and calculated the maximum stress generated on the Kerboull-type (KT) plate and screw. Bone defects were classified into four patterns according to the volume. Regarding the bone graft type, bulk bone grafts were considered as cortical bone, and morselized bone grafts were considered to consist of cancellous bone. Models were compared based on whether hook fixation was used and whether a gap was present behind the plate. The upper surface of the host bone was fixed, and a 1,000-N load was imposed on the horizontal axis at 71°. Larger bone defects increased the stress on the KT plate and screws. This stress increased when no bone was grafted; it was lower when bulk cortical bone grafts were used for filling than when morselized cancellous bone grafts were used. For cortical bone grafts, the increased stress on the KT plate and screws was lowered with hook removal. Attaching the hook to the bone and filling the gap behind the KT plate with an adequate bone graft reduced the stress on the KT plate and screws, particularly for large bone defects filled by bulk bone grafting.

[PubMed - indexed for MEDLINE]
PubMed Commons home

PubMed Commons

How to join PubMed Commons

    Supplemental Content

    Full text links

    Icon for Springer
    Loading ...
    Write to the Help Desk