Display Settings:

Format

Send to:

Choose Destination
See comment in PubMed Commons below
Guang Pu Xue Yu Guang Pu Fen Xi. 2013 May;33(5):1429-32.

[Temperature compensation strategy and implementation for photoelectric modulation interferometer with large optical path difference].

[Article in Chinese]

Author information

  • 1Engineering Technology Research Center of Shanxi Province for Opto-Electronic Information and Instrument, Taiyuan 030051, China. wychgfs@yahoo.com.cn

Abstract

For temperature drift in hypervelocity photoelectric modulation interferometer, a control model of temperature compensation is presented including voltage and phase compensation. First, according to the similar and modeling theory, an equivalent circuit model of mechanical properties of hypervelocity photoelectric modulation interferometer was established, the impact of temperature drift on its resonance frequency was analyzed, a mathematical model was set up, which contains drive voltage, frequency and resonance frequency, and the control method was determined for high optical path difference to get steady. Then, a digital method including voltage and phase compensation is given for optical path difference deviation control, which merges the DPLL and program of voltage and phase compensation. Finally, the control method was tested through experiment system. A test between drive control system including voltage and phase compensation and traditional drive control system was executed, using a laser doppler vibrometer to record the amount of change in optical path difference within 3 hours. Results show that the optical path difference deviation caused by temperature drift in long term is reduced by about 50%.

PMID:
23905367
[PubMed]
PubMed Commons home

PubMed Commons

0 comments
How to join PubMed Commons

    Supplemental Content

    Loading ...
    Write to the Help Desk