Emission characteristics of heavy metals and their behavior during coking processes

Environ Sci Technol. 2012 Jun 5;46(11):6425-30. doi: 10.1021/es300754p. Epub 2012 May 18.

Abstract

Besides organic pollutants, coke production generates emissions of toxic heavy metals. However, intensive studies on heavy metal emissions from the coking industry are still very scarce. The current work focuses on assessing the emission characteristics of heavy metals and their behavior during coking. Simultaneous sampling of coal, coke, residues from air pollution control devices (APCD), effluent from coke quenching, and fly ash from different processes before and after APCD has been performed. The total heavy metal concentration in the flue gas from coke pushing (CP) was significantly higher than that from coal charging (CC) and combustion of coke oven gases (CG). Emission factors of heavy metals for CP and CC were 378.692 and 42.783 μg/kg, respectively. During coking, the heavy metals that were contained in the feedstock coal showed different partitioning patterns. For example, Cu, Zn, As, Pb, and Cr were obviously concentrated in the inlet fly ash compared to the coke; among these metals Cu, As, and Cr were concentrated in the outlet fly ash, whereas Zn and Pb were distributed equally between the outlet fly ash and APCD residue. Ni, Co, Cd, Fe, and V were partitioned equally between the inlet fly ash and the coke. Understanding the behavior of heavy metals during coking processes is helpful for the effective control of these heavy metals and the assessment of the potential impact of their emissions on the environment.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Air Pollutants / analysis*
  • Coal Ash / analysis
  • Coke / analysis*
  • Distillation / methods*
  • Gases / analysis
  • Metals, Heavy / analysis*
  • Power Plants

Substances

  • Air Pollutants
  • Coal Ash
  • Coke
  • Gases
  • Metals, Heavy