Integration of chemical scrubber with sodium hypochlorite and surfactant for removal of hydrocarbons in cooking oil fume

J Hazard Mater. 2010 Oct 15;182(1-3):39-44. doi: 10.1016/j.jhazmat.2010.05.122. Epub 2010 Jun 1.

Abstract

There are many types of technologies to control cooking oil fumes (COFs), but current typical technologies, such as electrostatic precipitator, conventional scrubber, catalyst, or condenser, are unable to efficiently remove the odorous materials present in COFs which are the primary cause of odor-complaint cases. There is also a lack of information about using sodium hypochlorite (NaOCl) and surfactants to remove contaminants in COFs, and previous studies lack on-site investigations in restaurants. This study presents a chemical scrubber integrated with an automatic control system (ACS) to treat hydrocarbons (HCs) in COFs, and to monitor non-methane HCs (NMHC) and odor as indicators for its efficiency evaluation. The chemical scrubber effectively treats hydrophobic substances in COFs by combining surfactant and NaOCl under optimal operational conditions with NHMC removal efficiency as high as 85%. The mass transfer coefficient (K(L)a) of NMHC was enhanced by 50% under the NaOCl and surfactant conditions, as compared to typical wet scrubber. Further, this study establishes the fuzzy equations of the ACS, including the relationship between the removal efficiency and K(L)a, liquid/gas ratio, pH and C(NaOCl).

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Air Pollutants / isolation & purification*
  • Cooking*
  • Hydrocarbons / isolation & purification*
  • Oils / chemistry*
  • Sodium Hypochlorite / chemistry*
  • Surface-Active Agents / chemistry*

Substances

  • Air Pollutants
  • Hydrocarbons
  • Oils
  • Surface-Active Agents
  • Sodium Hypochlorite