Format

Send to:

Choose Destination
See comment in PubMed Commons below
Appl Opt. 1990 Aug 1;29(22):3303-15. doi: 10.1364/AO.29.003303.

Gated photomultiplier response characterization for DIAL measurements.

Abstract

The characteristics of various detector responses are studied to understand the cause of various systematic biases and to minimize these undesirable effects in measurements of transient signals with large dynamic range. We quantitatively evaluated signal induced bias, gain variation, and the linearity of commonly used gated photomultipliers in the current integrating mode. Analysis of the results indicates that impurity ions inside the photomultiplier tube are the source of the signal induced bias and gain variation. Two different photomultiplier tubes used in this study show significant differences in the magnitude and decay behavior of signal induced bias. We found it can be minimized by using an external amplifier to reduce PMT gain, and by applying a low potential between the cathode and first dynode. The linearity of a photomultiplier tube is also studied over a large dynamic range of input intensities employing a new technique which does not require an absolute calibration. The result of this study shows that the photomultiplier response is linear only for a limited input intensity range below a certain anode current.

PMID:
20567413
[PubMed]
PubMed Commons home

PubMed Commons

0 comments
How to join PubMed Commons

    Supplemental Content

    Loading ...
    Write to the Help Desk